1988 Ford Mud Flaps

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

Hello Michael, Congrats on the new truck! What is your favorite new feature? Yes, the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional #RED87CR comes with the vehicle specific pigtail making it a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Michael, thanks for reaching out. The Gen-Y Torsion 2-Ball Mount #325-GH-1225 weighs 84 lbs altogether including the ball mount, ball attachment and pintle lock.

The difference between the different mud flaps under the Access Rockstar Commercial line is simply fitment. The correct mud flap for a 2023 Ram 3500 would be the Access Rockstar Commercial Grade Mud Flap #A92NG. There is also a optional trim kit…

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

Hey Bill, yes the Blue Ox Adjustable Mud Flap System part #BLU49UR can fit on the shank of a Blue Ox weight distribution system as long as for sure your hitch is the 2 inch hitch size. The part #BLU69UR that you referenced is the 2-1/2 inch hitch…

Hello Bryan, thanks for reaching out. Sadly, there is no online version of the instruction for the EcoHitch Front Hitch #EH25HR. They only exist as the paper instructions that come with the hitch. Even the manufacturer does not have them available on…

Hey Matt, thanks for reaching out! I'm guessing your Ford F-350 is a 2016 model since that's what you have in our fitguide. For replacement Trifecta tarps we have the part #EX94725-20 for the Signature 2.0 and the part #EX92725-20 for the…

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Mike, thanks for reaching out! The 16K Pullrite SuperGlide #PUL43RR is an excellent option for towing your Grand Design with your 2025 F-250, and if you lockout your Lippert Turning Point pin box you'll be able to use them together. You…