Universal Group: Comprehensive Automotive SolutionsOffering a wide array of automotive products, Universal Group ensures quality and reliability for every vehicle.
Innovative Designs:
Products are engineered to meet the evolving needs of the automotive market.
Quality Assurance:
Each product undergoes rigorous testing to guarantee performance and durability.
User-Centric Features:
Designed with the end-user in mind for maximum convenience and ease of use.
Versatile Applications:
Suitable for a wide range of vehicles, ensuring compatibility and effectiveness.
For automotive solutions that combine innovation and quality, choose Universal Group.
I did a little research and found that slipper spring #e74SR does have similar specs and measurements as Dexter spring 072-032-00. Both are 2 inches wide, 5-leaf slipper springs but #e74SR is 26-5/8 inches long with 3,500 pound capacity for 7,000…
As long as the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long #e36SR is the same length as your current flat-end spring you can use it as a replacement. The only "radius" style of leaf spring that…
Hey Dion, on slipper springs like the part #e89SR that you referenced the rear hanger location should be right in the middle of the flat portion on the back of the spring. It's not an exact science but having the hanger sit right in the middle of…
The slipper spring should sit on the hanger bolt somewhere in the center of the flat part so that it allows a bit of movement as the suspension articulates. The curved ends will generally going to keep the spring from moving too far if the suspension…
The Dexter Axle 4-Leaf Slipper Spring w/ Hook End for 2,500 pound Trailer Axles - 26-3/4 inch Long #DX93QR has a slipper width of 2 inches. The site has both 2 inches and 1 3/4 inches but 2 is the correct measurement. To mount the double eye spring…
Yes, there is a difference between an oil seal and a grease seal for trailer hubs. Oil seals have a much tighter fit on the spindle to keep the oil from leaking out. An oil seal can be used with grease but a grease seal cannot be used with oil. The…
Thank you for all of that information; it definitely makes it easier to identify the appropriate parts, and it looks like you were on the right track. If your boat and trailer weigh less than 1000-lbs total, the UFP Slipper Spring for 1000-lbs Axles…
Yes, you can replace a two leaf spring stack with a three leaf spring stack so long as your center to center (double eye springs only) measurement matches but please note the loaded and unloaded as well as the new and used center to center…
The flat end of a slipper spring should stick far enough through a hanger to allow for the full travel of the suspension without the spring coming out of the hanger. When you have no load on the spring and especially if the frame is currently upside…
Hi Bobby; I have attached a help article below which explains how to replace trailer leaf springs in 5 steps. I also attached an installation video. Between the two you should be able to install the #DX55CR without any issues. Edit: I just double…
etrailer's Universal Group SupportExplore a diverse selection of Universal Group products at etrailer, backed by expert advice.Our team is committed to helping you find the right automotive solutions tailored to your needs.Trust etrailer for personalized service and exceptional support with Universal Group.
Universal Group: Comprehensive Automotive Solutions
Offering a wide array of automotive products, Universal Group ensures quality and reliability for every vehicle.
