Hey Marvin! Yes, your Trailer Mate Trailer Hitch #TMT67FR will be able to handle your jetski and trailer. The hitch has a max gross trailer weight of 5,000 lbs and tongue weight of 500 lbs. At 890 lbs you are well below the limitations of the hitch…
Hey Darren, thanks for reaching out. Yes, we actually have several hitches for the 2026 Hyundai Tucson Hybrid N-Line. Here are all the available options: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C94WR - Trailer Mate Trailer…
Thanks for reaching out Leroy, For the 2026 Subaru Forester Premium, the EcoHitch #306-X7391 is my recommendation if you're planning to use a hitch hauler. This EcoHitch has a concealed cross tube, so only the receiver is visible. It also allows…
Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…
Hi David! We do have a plug in wiring harness for your 2024 Toyota Highlander XLE with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56RV. This is fully plug and play and will use that square port/plug you already…
Hey Hannah, thanks for reaching out. Yes, the Curt #C59236 will indeed work on a 2026 Chevy Equinox EV LT1 without the tow package. This is a universal hardwire harness that can be used on most vehicles. There are no custom plug-in harnesses for the…
Hey Kevin, You are not overthinking it, tongue weight is always tricky! Everything you use on the etrailer hitch #e98848 with your vehicle is limited to your vehicles capacity. I took a look and your 2019 Honda CRV's vehicle tongue weight…
Hello Steve, Thanks for writing in, and I can definitely understand the confusion! Yes, the Curt Trailer Hitch Receiver #C22MJ will fit your 2026 Subaru Crosstrek Limited Hybrid. When you see the Hybrid and non-Hybrid fit information listed…
Hello Mike, Thanks for writing in. The Trailer Mate Trailer Hitch Receiver - Custom Fit - Class III - 2" #TMT67FR is going to be a great fit for your 2020 Toyota Highlander. The hitch itself weighs around 36 pounds. If you are looking to tow a…
Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…
Hello Ken, It looks like the measurement for the Curt and the Eco are going to be the same. We have not been able to do the install on the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" #EH82KR but after reviewing the instructions the…
Hey Ted, The front and rear arms for the Dr. Tray bike rack are unfortunately different so there aren't interchangeable. I actually had someone else looking for this part not too long ago and was told by Yakima that it's discontinued with no…
