The Source Company: Quality Products for All Your NeedsThe Source Company provides a wide range of high-quality products designed to meet your everyday needs.
Diverse Selection:
From household items to specialized tools, we have it all.
Exceptional Quality:
Our products are sourced from trusted manufacturers to ensure reliability.
Affordable Pricing:
Quality doesn’t have to come at a high price; we offer competitive rates.
Customer Satisfaction:
Your satisfaction is our priority; we strive to exceed your expectations.
Choose The Source Company for all your quality product needs.
I recommend using the 601 Flooring Adhesive in a 1 Gallon #TS76FR or 4 Gallon #TS26FR depending on your application. The 601 does not have the pressure sensitive requirements of the 801, 1 Gallon #TS86FR and 4 Gallon #TS58FR adhesives.
You can use either of the adhesives for permanently installing the Small Coin Pattern Vinyl Flooring #TS37FR to your utility trailer: - Vinyl Over Wood #TS76FR - Vinyl Over Wood, Metal, or Concrete #TS86FR Both options come in a Gallon tub and…
You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
Hey Darryl, thanks for reaching out. That's probably because we don't have a video that shows that. We do mostly trailer/RV work, and we don't see many box trucks here at our shop. I can still provide some general instructions for you…
If you are using self-tapping screws and attaching the part #E19148 5-foot rails to metal, you would be okay. If you are installing this into wood I would recommend making sure you have the right size fasteners for the 1/4 inch mounting holes, and…
You do need to run a 10 gauge wire like part #10-1-1 (sold by foot) from the positive pin of the battery to the 11:00 pin of a male 7-way but you do not need to ground the battery for it to accept the charge.
The DeeZee Specialty Series Trailer Tongue Toolbox #DZ91716 may be what you're looking for. It measures 34 inches long in the back, 16 inches long in front, 14-1/4 inches wide and 18 inches tall. It's a 3.71 cubic foot box that locks and…
Hello Mark. The RV Flooring Adhesive #TS86FR can absolutely be used for putting rubber coin grip flooring over aluminum. This adhesive can be used for virtually any wood, metal, or concrete surface, and this will include the aluminum flooring in your…
Good question, Tina - you’re in the safe zone with the M-3 aluminum plate #M348FR. It’s 3/16 inch thick and fully welded across the piano hinge (some cheaper ones are just bolted instead of welded), so even with heavy mowers or small tractors, it…
If the RV Vinyl Flooring Item #TS29FR can be used on a garage floor it should hold up fine in a trailer that would be exposed to cold weather when in storage. It is designed for campers, RVs, and trailers that are typically exposed to cold weather…
The RV Flooring Adhesive for Vinyl Over Wood #TS76FR is designed for trailers that sit out in the elements full-time so yes, it will withstand high temperatures in a van that's sitting out in the sun all day.
We have multiple options in 12', 18' and 24' lengths. My recommendation is the Small Coin Pattern, #TS67FR at 18' length with additional 12' from the #TS57FR. For wood flooring, use either RV Flooring Adhesive for Vinyl Over Wood,…
etrailer's Source Company SupportAt etrailer, we are proud to offer a selection of Source Company products with expert assistance.Our knowledgeable team is dedicated to helping you find the right products for your specific needs.Count on etrailer for personalized support and tailored recommendations to enhance your shopping experience.