

Most Popular Paneloc
Videos
for Paneloc
Help Articles
for Paneloc
Expert Answers
for Paneloc
Hello Arturo, Yes, the Master Lock Hitch Receiver and Coupler Latch Lock Set - Swivel Design - 2" Hitches #1481DAT will be a great fit for your Demco #DM15945. Good idea to keep things locked up and secure in the world we live in today. Any fun…
view full answer...Hello Cale, thanks for getting in touch. We do offer some off-road tires but nothing in a 14". Our smallest off-road tire is the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR. The ST235/75R15 tires are 9.3" wide and 29" in…
view full answer...Thanks for reaching out, Steve! The Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR will be about 1" closer to any fenders and about 1/2" closer to your trailer frame. Unless you're already strapped for clearance I don't see…
view full answer...The best option I have for you to replace the latch in the living quarters of your 2000 Exiss Gooseneck Horse Trailer is with the Global Link RV Entry Door Locking Latch Kit part #295-000019 which installs in a 2-1/2" wide x 3-1/2" tall to…
view full answer...The Replacement Square End Cap #853-5826 should work perfectly for you. I went out and measured one and found that it's overall diameter is 2 inch by 2 inch and the inner tube piece measures a tiny bit over 1.75 inches by 1.75 inches so it would…
view full answer...The Paneloc Slam Latch part #F707-104Z011 was not designed to work with a striker plate so there isn't one available for it.
view full answer...Hey John, the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR weighs in at about 41 lbs.
view full answer...I believe we have just about everything you need, ideally we'd need you to measure your center bolt and u-bolts to make sure the here will fit. So, for a center bolt you can use the Leaf Spring Center Tie Bolt with Nut #38-3TB which measures…
view full answer...Most likely the measurement is 25-1/8 inch as that is a common size. But in most cases we recommend measuring the spring with it off the trailer and typically there is a bit of stretch to old springs by around 1/2 inch or so. The spring you would…
view full answer...We can get you the right shackle kit for your single axle trailer with a Dexter 3,500 lb axle, and you can choose from either a standard kit or an upgrade kit. Either will work, though the Upgrade Kit is going to be the best option due to the fact it…
view full answer...We do sell round u-bolts used to secure leaf springs to the axle, the correct ones for you will be based on the size of the axle. The Dexter Trailer Axle part #7359765-I for example has a 3,500 lb weight capacity so it is 2-3/8" diameter and a…
view full answer...There many possible ways to mount a stabilizer jack such as the #TJ01RT-HD you looked at. Mounting them in the orientation shown the diagram would tend to work a bit better to stabilize the trailer against side to side movement, while having the…
view full answer...
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"