Expert Review Video:
Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
525 Pound Tongue Weight
3500 Pound Towing
Weight Distribution Towing Capacity:
525 Pound Tongue Weight
4000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Installation Notes:
No drilling required for installation
Underbody trim panel must be modified or trimmed if present
Fits Hybrid models as well
Hitch may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
525 Pound Tongue Weight
3500 Pound Towing
Weight Distribution Towing Capacity:
525 Pound Tongue Weight
4000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Underbody trim panel must be modified or trimmed if present
Fits Hybrid models as well
Hitch may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
675 Pound Tongue Weight
4500 Pound Towing
Weight Distribution Towing Capacity:
675 Pound Tongue Weight
4500 Pound Towing
Trailer Wiring:
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Trimming or removal of underbody panel required for installation
Fits Hybrid models as well
Hitch may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost.
Tech Tip:
Best for Bike Racks and Cargo Carriers and Highest Capacity
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...