Expert Review Video:
Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
350 Pound Tongue Weight
3500 Pound Towing
Weight Distribution Towing Capacity:
400 Pound Tongue Weight
4000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 6" Long receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Tech Tip:
Hitch receiver tube sits beneath rear bumper to remain out of the way when accessing the cargo area of the vehicle.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
675 Pound Tongue Weight
4500 Pound Towing
Weight Distribution Towing Capacity:
675 Pound Tongue Weight
4500 Pound Towing
Trailer Wiring:
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Tow hooks, if present, will be permanently removed
Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Tech Tip:
Hitch will fit models with Mopar Off Road Bumper #82213654.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Tech Tip:
Hitch receiver tube is longer than the other Curt hitches and will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Trailer Wiring:
Features:
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Tow hooks, if present, will be permanently removed
Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Tech Tip:
Hitch receiver tube is longer than the other etrailer hitches and will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
Excellent Experience. Nice website. Easy to find the right hitch. Hitch came quickly. It was a perfect fit for our Toyota Matrix with Ground Effects.
Mike
Decatur, IL