2013 Jeep Wrangler Grille

The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…

Hey David, thanks for reaching out. That is a slick camper. Your 2017 Airstream flying cloud uses a #11 Dexter axle. It uses a #25580 (1.75" inner diameter) inner bearing and #M67048 (1.25" inner diameter) outer bearing. We can provide…

The front ends of the Silverados and Sierras like your 2018 GMC 2500 are a bit different but the fascia trimming required is the same as you can see in the two attached pictures when installing front hitch #65078. Basically a hole gets cut through…

The Draw Tite Front hitch part #65078 actually sticks out 2 inches past the front bumper of a 2017 Chevy Silverado 2500 like you have. I attached a picture I took from a different install video for this hitch (also attached) that shows this.

I can say that Curt doesn't consider the hitch a fit, but if you look at the provided photo, you can see the mounting hole spacing on the hitch and compare it to the frame member of your truck.

Hello Francis, thanks for reaching out. That is a pretty tall order. The strongest hitch extensions we offer are the TorkLift SuperTruss Hitch Extensions like part #TLE1548 (10,000 lbs towing 500 lbs tongue weight). These can only be used with a…

The closest thing that we have to what you are looking for is something like the Demco #Demco Trailer Coupler w/ 5-Position Adjustable Channel #DM6125-81 (which can come in a variety of options) which you can interchange with the Demco Lunette Ring…

Using the hitch extension will reduce the tongue weight capacity of the trailer by 50 percent. But if you have a 2 1/2 inch trailer hitch receiver and use the Titan hitch extension #RP45292 the tongue weight capacity will not be reduced. At the 24…

For an absolutely amazing cover for your dually 2012 Ford F-350, I recommend the RetraxPRO MX Hard Tonneau Cover #RT80362 (6-3/4" beds) or the #RT80323 (for 8 foot beds). Not only does this cover allow you to open the it at any point of the…

The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte #RT80323 will have a measurement of 11-5/8 deep by 13-3/4 inches long by 63 inches wide. I reached out to the manufacturer to confirm these dimensions and created a photo to…

I did some research and found that the Erickson O-Track Cargo Control System like part #EM59133 is very similar to the L-Track systems you referenced. The Erickson O-Track is 18 inches long and includes 2 Spring-loaded O-ring clips and mounting…

Hey Gary! The Aries ActionTrac #AA3048324 will run under all four doors on your 1999 Ford F-250 Crew Cab. The top step measures 88" long x 4-1/2" wide and the deployed step is 72-1/2" long x 3-1/2" wide. I also attached a picture…