Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Weight Distribution Towing Capacity:
1200 Pound Tongue Weight
12000 Pound Towing
Trailer Wiring:
2012 Ford F-150 Raptor Trailer Wiring
With tow package use 74682 for wiring
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1000 Pound Tongue Weight
10000 Pound Towing
Weight Distribution Towing Capacity:
1200 Pound Tongue Weight
12000 Pound Towing
Trailer Wiring:
2012 Ford F-150 Raptor Trailer Wiring
With tow package use C56110 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
800 Pound Tongue Weight
8000 Pound Towing
Weight Distribution Towing Capacity:
1500 Pound Tongue Weight
15000 Pound Towing
Trailer Wiring:
2012 Ford F-150 Raptor Trailer Wiring
With tow package use 74682 for wiring
Features:
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.
Installation Notes:
No drilling required for installation
Hitch is designed to fit Short Bed models
Hitch is designed for vehicles with factory hitch rated to 10,500 lbs; it does not fit vehicles with factory hitches rated to 11,500 lbs
Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
Fast shipping! Received the hitch and accessories here in Hawaii in less than a week!! The hitch and all the parts fit GREAT!! THANKS!!!!This was a very easy project for a first time rookie like me.
Don
Hilo, HI