Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
9 Inch Drop Pound Tongue Weight
Class V Pound Towing
Features:
This class V universal weld-on trailer hitch receiver with brackets has a 9" drop and is designed for use on service body trucks and utility body trucks.
Installation Notes:
Welding required
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
9 Inch Drop Pound Tongue Weight
Class V Pound Towing
Features:
This class V universal weld-on trailer hitch receiver with brackets has a 9" drop and is designed for use on service body trucks and utility body trucks.
Installation Notes:
Welding required
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
9 Inch Drop Pound Tongue Weight
Class V Pound Towing
Features:
This class V universal weld-on trailer hitch receiver with brackets has a 9" drop and is designed for use on service body trucks and utility body trucks.
Installation Notes:
Welding required
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
18 Inch Drop Pound Tongue Weight
Class V Pound Towing
Features:
This class V universal weld-on trailer hitch receiver with brackets has a 18" drop and is designed for use on service body trucks and utility body trucks.
Installation Notes:
Welding required
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
18 Inch Drop Pound Tongue Weight
Class V Pound Towing
Features:
This class V universal weld-on trailer hitch receiver with brackets has a 18" drop and is designed for use on service body trucks and utility body trucks.
Installation Notes:
Welding required
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
1600 Pound Tongue Weight
16000 Pound Towing
Weight Distribution Towing Capacity:
18 Inch Drop Pound Tongue Weight
Class V Pound Towing
Features:
This class V universal weld-on trailer hitch receiver with brackets has a 18" drop and is designed for use on service body trucks and utility body trucks.
Installation Notes:
Welding required
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...I&…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...