1996 Acura NSX Vehicle Engine Heaters

Christopher, I did some research, and it looks like it should be by the exhaust on the driver's side of the engine, underneath the driver's side door. Immediately behind the driver side exhaust header there is a factory designed hole for the…

Hello Sébastien; the Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style #KH11812 will fit your 2012 Hyundai Accent if you have the 1.6L I4 Engine. Also yes, we do ship to Canada. Bonjour Sébastien; Le chauffe-bloc moteur sur…

I really wish we had the chance to install the Kat's heater #KH13150 so we could provide an install video or pictures but the best is the following written instructions: To install the heater you will first need to drain the cooling system. Then…

The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for the 3.5L V6. You should not need to alter the element or clip in any way and doing so is not recommended. You may want to…

Hey Kevin! I'm not Jon G but I would be happy to help. More than likely you have a regular coupler so the Blue Ox SwayPro #BXW2000 would be the correct system. I attached a picture of an underslung coupler for your reference. If your coupler…

Hey Rich! I checked with Westin and their MAX Winch Mounting Tray item #W62PF adds right at 15-1/2" to the front of your 2025 Nissan Frontier. I recommend adding a couple of the Westin MAX Winch Tray Tow Hook item #46-3005 to have a couple extra…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

Hey Suzanne, looks like you found our Wiper Technologies blade part #WPR55FR which is 32 inches long and uses the same j-hook style connection as what your Ford F-53 has so it would work well for you.

Yes you can convert your Lippert 8K axle so that it works with oil instead of grease. Just swap out your hub and drum assembly with one that has threads for the oil cap to install on. For example, the Dexter Axle part #8-285-9UC3 should work just…

The correct engine block heater for your 2017 Toyota RAV4 Limited with the 2.5L I4 engine is the Kat's Heaters Custom Fit Engine Block Heater part #KH11813. According to Kat's, the block heater will need to be installed on rear left potion of…

We have a large selection of battery heaters, which I have linked below, that are designed to work with certain size/model batteries. In terms of physical size the largest heating pad style heater we have is the Kat's #KH22600 which measures 18…