You would need to install the Fulton Fold-Away Coupler Hinge Kit #FHDPB330301 on the smaller 3 inch by 3 inch section of the tongue on the coupler. It would fit on your trailer that has a length there of 7-3/4 inches and would work well. It would add…
Thank you for the photo. We may have a few replacement seal options for your Seal on 2001 SnoPro Clamshell Enclosed Trailer but you'll need to confirm the dimensions we have will work for what you're needing. The Rubber Large Half Round Seal…
I more or less agree with you. The Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, is a cleaner look and if you got a bad weld job you would not have a safe setup. I have done some welding, I am in no way a…
It does not come with instructions but it is pretty easy to replace. For your Titan Aero 6000 the correct replacement master cylinder is item #T4395100. This is the replacement master cylinder that works with drum brakes. I was able to find an…
For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…
The correct replacement grease seal for your Dexter hub is the Grease Seal #RG06-050. This has been cross referenced and confirmed to be the correct replacement.
Hey Steve, The Specialty Recreation Insta Holding Tank Patch Kit #SR48RR works on all forms of plastic and since polyethylene is a form of plastic you'd be good to go.
I have attached a link to all of our trailer hubs that use #L68149 and #L44649 bearings and have a 5 on 4-1/2 bolt pattern. I recommend the Dexter Trailer Hub Assembly #8-247-50UC3-EZ. This hub features a grease cap that is compatible with EZ lube…
We can help you with either new disc brakes or with replacement parts for your existing disc brake setup on your Ranger boat trailer. Either way you will want to confirm the axle rating of the single or tandem axles on the trailer since complete…
When selecting the correct replacement axle for a utility trailer you will need to know both the hub face (wheel center) and spring center measurements. For example, if your current hub face measurement is 88" and you replace this with an axle…
Yes, you can. The Wheel Masters Tire Pressure Valve Extenders item #WM8029 you were looking at will not affect your factory tpms. I have linked an installation and review video below. Here are some other options for valve extenders: Wheel Masters…
We sure can! The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
Filters
