Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The shortest tire we carry that is designed to fit a 16 inch rim would be the size 235-80R16 that is 30.9 inches in diameter. For that you would want the part #AM10248. I attached a review video for this tire for you to check out as well.
view full answer...The only black replacement hinge option we carry is the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR. This hinge will work as a replacement but you'll notice the mounting holes most likely won't match…
view full answer...Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…
view full answer...In this situation, most folks either replace the safety chains, using a hook that will fit. Another option would be to use a quick link, like #C82932. Attach the quick link to the safety chain hole in the hitch, then attach the safety chain hook to…
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...There is a replacement that I recommend for the Tie Down 70E disc brake actuator, though you will want to verify that your mounting bolt holes are 3 inches apart on center and your tongue is a 3 inch channel. If they are I recommend the Dexter DX7.5…
view full answer...We have H channel you could use with the part #36281-955 which is 93-1/2 inches long but we don't have a way to cut it here. You'd have to cut it down to the size that you need.
view full answer...It looks like the best option is going to be single-spring system #362SA8. It is 94 inches wide total but it can be adjusted from 45-1/4" to 95-5/8". This system has a capacity of 150 pounds. The installation instructions for this product…
view full answer...To determine the correct weight springs you will need a scale to determine how much weight is on the door when it lays out on the ground. You will place the scale on the ground in the center of the landing path of the door edge. This will tell you…
view full answer...To find the correct replacement axle it is very straight forward. You want to know the Axle weight rating. This is going to be on the sticker found on the cross tube of the axle if this is not present measure the axle tube diameter and that can help…
view full answer...The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…
view full answer...Since a 7-foot trailer width is 84-inches the nearest ramp spring size will be the 81-inch size like #ERS120D81. The linked review video will give you details on this item. All ramps springs are shown on the linked page. The installation instructions…
view full answer...Related Searches
Filter Your Search
Contact and Help