Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.
Hey Colton, thanks for reaching out! The correct replacement bearing kit for your 5,200 lb axle is the Bearing Kit #BK3-300. I was able to have my contact at Dexter Axle cross-reference these parts to make sure that's what came with your axle.…
Brian, you’ll each want the version that matches your RV’s service. The #HU84ZR is built for 30A rigs like your friend’s Cougar, while the #HU74ZR is made for 50A rigs like your Cedar Creek. They both do the same job - voltage boosting, surge…
Good thinking, Andy good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…
Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?
Hi Scott! There is a way to fine tune your Roadmaster Exact Center Steering Stabilizer #RM33RR. I included a link that you will want to scroll down to step 9 to see what you can do, but basically there are jam nuts you can adjust that can do much…
Hey Mark, thanks for providing all the details! I see you ordered the 18.5K Weigh Safe True Tow Weight Distribution Hitch (WDH) #WS49MR. This might be a little heavy for your application, but if you have your trailer weighed down to the GVWR and a…
Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
Hey Brian, thanks for the pictures. The etrailer Anti-Rattle Hitch Collar item #e38FV is not going to fit your Ascent's factory hitch. It's going to be a tight fit if you can even mount it with the chain hangers so close but the main issue is…
Hi Chris! Quartzsite sure sounds like a great stop - hope you’re soaking up that sun! Yes, the SnapPad StakPad blocks black #SN74VR or white #SN64VR are a universal fit and will work with your hydraulic auto-leveling system. They’re especially handy…
Hello Steven, thanks for reaching out. You are correct that using a swing away adapter or hitch extender will reduce your hitches carrying capacity by half. We put that warning on the part page for all of the hitch adapters we offer. So if the hitch…
Durable 10-Inch Jack Foot Pads for Your RV Adventures
Explore the convenience and stability of 10-inch jack foot pads, perfect for RV enthusiasts. These 4-pack pads offer a secure fit and ease of installation, enhancing your RV's stability on various terrains. Ideal for those long trips, they simplify setup
Absolutely! Many have traveled over 10,000 miles with these pads, noting their durability and reliability. They stay securely in place, even after numerous uses, making them ideal for frequent travelers.
Yes, these pads are designed to withstand various weather conditions. They maintain their grip and support on both dry and wet surfaces, ensuring your RV remains stable regardless of the weather.
These pads provide a larger footprint, reducing the risk of slipping on concrete and offering better support on softer ground. They help distribute weight evenly, making your RV more stable during setup and use.
Using a set of 4 ensures each jack has a dedicated pad, providing consistent support and stability. This setup simplifies campsite preparation, as you won't need to manually place pads under each jack.
Installation can be straightforward with the right tools and a level surface. Some find it easier with a helper. Using liquid soap around the edges can help the pads snap on smoothly, ensuring a secure fit.
Filters
