Wheel Locks - Trailer, 17 Inch

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey Rob, A 7k axle would have a 3" diameter tube so the CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles #CE23003 would be the correct fit. These kits are for one axle each so you'll need to purchase one for each axle on your…

The actual locking mechanism is the difference. The Trimax Heavy Duty #TMX42ZR has a much more robust hardened steel lock while the Trimax #TMX65FR uses a tube key style lock for the main lock.

I have the perfect solution for you, Chris! The 13.5K Btu Advent Air Low Profile RV Air Conditioner for Dometic Setup with a Start Capacitor is a great replacement as it has the same output rating of your current AC unit, it has a plug to plug right…

Hey Heather, unfortunately the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT is keyed unique so it's not available to be keyed alike. Instead, you'd have to use something like the Master Lock Set #ML44VR which come…

You will be able to use the Trimax Heavy Duty Adjustable Wheel Lock with Padlock #TMX42ZR on your vehicle/trailer. It won't have any issues fitting your LT265/75R16 tires with 16" wheels.

I'll go ahead and list out below all the tire sizes that are compatible with the Trimax Trailer Wheel Chock and Lock - 12" to 15" Wheels #TMX75FR: - 4.80-R12 - 195/75-R14 - 205/60-R15 - 205/70-R15 - 215/70-R15 - 225/75-R15 - 235/75-R15

Yes, since your ST205/75 R14 tire has a width of 8" and the Trimax Trailer Wheel Chock and Lock #TMX75FR can fit up to 15" tires, this wheel chock will work just fine for you. Attached is a review video for you to check out if you have not…

The etrailer Trailer Wheel Lock, part #288-02020, will fit your UTV provided its tires are between 6-3/4" -10-1/2" wide. Another option is the Trimax Trailer Wheel Chock and Lock - 12 - 16-1/2" Wide Tires, part #TMX62ZR, which can fit…

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…