1. Home
2. Trailer Parts
3. Wheel Chocks
4. Yellowx
5. Ericksonx

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Dennis, thanks for reaching out! The 4-Leaf Double-Eye Spring #DX23CR has a 3" drop from center eye to middle of the leaf spring (see attached photo). For a single axle setup I recommend the Hanger Kit #APS4, and for a tandem axle setup I…

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

Measuring on the ground to the inside point of contact of each tire is correct. The Fastway ONEstep Wheel Chocks #FA84-00-4840 would be the right part for you, if your measured wheel spacing is between 16 and 24 inches on your dual-axle trailer.…

Hi Bernadette, You would want to plug your 50 amp to 30 amp adapter in to the power pedestal and then connect your Portable Power Watchdog Surge Protector #HU42VR to the adapter. Once the Watchdog lights show that the connection is good you can…

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

Hello Mark, thanks for reaching out. The TRED GT Camper Leveler Blocks #RR84AP are rated for 5,000 KG which is about 11,000 lbs. So these will be a great upgrade from wood blocks, so long as they are appropriately rated for your RV. When using…

Hello Thomas, thanks for reaching out. Blue Ox and Reese are both solid options for a weight distribution hitch. Between the two I would lean towards Blue Ox, just because their systems tend to be a bit more user-friendly and they will offer better…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Good afternoon Stephany, I'm sorry you had that less-than-stellar experience with the pin style anti-rattle device. Normally that setup works pretty well, but in some extreme towing situations, I definitely think the clamp style is better at…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…