Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Zinc-Plated Steel

See what our Experts say about this Polar Hardware Trailer Door Latch

• Dimensions of Cam-Action Lockable Door Latch for Large Enclosed Trailers
  The Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Stainless Steel # PLR258-002-SS has the following dimensions as I measured them in our warehouse: Hasp dimensions are 5-1/8" tall x 2" wide 3-3/4" From center of hole to center of hole Lock hole diameter: 1/2" Retainer dimensions: 4-1/2 tall x 1-1/2" wide Measures 3-1/8" from center of hole to center of hole Handle length: 14" Mounting hole diameter: 13/32" Keeper dimensions: 5-1/8" long x -1-1/2" wide Measures 4 inches...
  view full answer...
  
• Why Are My Tires Blowing About Every 2 Years
  With the information that you provided it would not be a weight issue. After doing some research it could be a few things. First you need to make sure that you're inflating your tires to the maximum PSI, If tires are underinflated, the tires can wear on the inside rather than evenly around the tread. Another option could be that your trailer suspension is not perfectly squared or the axle isn't straight and the tries can reflect by wearing unevenly, and finally I would check the hub....
  view full answer...
• Dimensions of Keepers on Lockable Door Latch
  The bottom keeper on Cam-Action Lockable Door Latch Kit # PLR258-002 measures roughly 5-1/8" x 2", while the top keeper measures roughly 3" x 1-3/8". I made a diagram which displays these dimensions, and have also linked a review video for you to take a look at.
  view full answer...
  
• Will the Polar Heady Duty Camp Action Door Lock Work to Latch Horse Trailer Dutch Doors to Ramp
  The Polar Heavy-Duty Cam Action Door Lock for Enclosed Trailers # PLR258-002 that you referenced will work well for you to add dual cam door locks to the dutch doors and ramp of your horse trailer. This cam action door lock can work for both right or left hand doors, so the same part number with work for both of the dutch doors on your trailer. The # PLR258-002 is designed for use with a 3/4 inch pipe, which is not included. This pipe can be found at your local hardware store.
  view full answer...
  
• Are There Dimensions Required for Use when Installing the Polar Cam Action Door Lock # PLR258-002
  When you install the Polar Heavy Duty Cam Action Door Lock # PLR258-002 You basically will want to mock it up on the trailer in the position you need it and then mark those locations so that when you permanently mount everything it all fits together well. If you are asking about the appropriate distance between the cams at the bottom of the pole and the pipe mounting brackets that really just depends on the setup. There isn't an exact distance required there. But I would try to get it as...
  view full answer...
• Bar Dimensions Compatible With Polar 258-002 Cam-Action Lockable Door Latch Kit
  I went out to our warehouse to take measurements of the Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Zinc-Plated Steel # PLR258-002. The bar you will need is 3/4 inches inner diameter and can be up to 1-1/8 inches outer diameter to fit in the brackets and move properly. I've attached a photo to assist.
  view full answer...
  
• Replacement Hasp for Polar Cam-Action Latch Kit
  Replacement Hasp # PLR258-101 can be used as a stand alone item but it is a replacement for the hasp that comes with Cam-Action Lockable Door Latch Kit # PLR258-002. It does not sound like what you are looking for though. To determine if we have what you are looking for I would need to see it. If you can please email me a picture.
  view full answer...
• Replacement Latches for 2002 Platinum LQ Horse Trailer
  We may have a solution for you though we do not have parts specific to trailers so you would need to find something compatible with your current latches. The Cam-Action Lockable Door Latch Kit w/ Wide Hasp # PLR258-002 may be an option, as could side door lock # PLR3057. I will link our selection of available door hardware for you to take a look at. If you can get back to me with a photo of what you need I may also be able to help you that way.
  view full answer...
• Recommended Side Door Latch For An Older Haulmark Enclosed Trailer
  We have a few options available for side door latches and one that I like is the Polar Hardware Cam-Action Lockable Door Latch w/ 36" Pipe # 305736. The shorter pipe makes this ideal for side doors as it isn't quite as large and bulky as options for rear doors. This may not be an exact replacement for your Haulmark trailer, but it definitely a good option.
  view full answer...
• 2007 Collin Arndt Replacement Latch Kit Recommendation for Door
  While we don't have that style of door latch kit, I do have a solution for you with the Cam-Action Lockable Door Latch Kit # PLR258-002 which comes with everything but the bar which is looks like you already have. I haven't seen that type of latch before so you may have trouble finding the top keeper which is why I referenced the kit above.
  view full answer...
  
• Replacement Handle Assembly Latch Kit and Pipe Retainer
  We do offer replacement pieces for the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel item # PLR258-002-SS you purchased. Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel item # PLR258-101 Replacement Handle Assembly for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # 158-100 Replacement Top Pipe Retainer for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # PLR158-209
  view full answer...
• Tips for Installing Trailer Cam Door Style Latch on Trailer With Door that Isn't Flush
  To use a cam door style trailer latch on a trailer door that sticks out 1 inch past surface you'd want to use a spacer behind the latch mechanisms that attach on the door. I'd also go with a setup like the part # PLR258-002-SS which allows you to provide your own bar. You could attach the latch on top of the bar so that you get more offset as well.
  view full answer...
  
• Cam Style Trailer Door Latch Recommendation For Limited Clearance Area for Brackets
  The big difference between the Cam Door Latch # PLR458-018 and the # PLR658-002 is the robustness of the pipe mount on the handle side. The # PLR658-002 is more for heavy duty applications and comes with bushings for the pipe to mount in. This requires a 1-5/16 inch diameter pipe and the other requires 3/4 inch diameter. That said, since you said you only have a space of 2-7/16 inches for the bottom bracket to fit you'd actually want the part # PLR258-002 instead as it has a smaller sized...
  view full answer...
• Replacement Bolt-Down Clamps for the Polar Lockable Door Latch Kit # PLR258-002-SS
  The correct replacement you need to replace the clamps from the # PLR258-002-SS is the Replacement Top Pipe Retainer for Polar Cam-Action Latch Kit - Stainless Steel # PLR74FR. This comes with a quantity of 1 clamp.
  view full answer...
  
• Availability of Stainless Steel Trailer Side-Door Bar Lock Assembly
  The Polar 55-Inch Side-Door Bar Lock Assembly # 3057-55 features galvanized steel construction but they do offer a universal kit with stainless steel components, part # PLR158-SS. This kit does NOT include the 3/4-inch diameter pipe so that one part you will source locally. Since you provide the pipe you can control the exact size of the lock set-up to best fit your trailer door. Polar also offers a heavy-duty version # PLR258-002-SS which is designed for flush to 3/4-inch-offset doors....
  view full answer...
• Latch For Interior on Enclosed Trailer
  Latches aren't really meant for the interior door of an enclosed trailer so nothing stands out, but you may be able to use something like the Side-Door Bar Lock Assembly # 3057-55. Otherwise, if you were ok with modifying your door you can use something like the Global Link RV Entry Door Locking Latch Kit # 295-000019.
  view full answer...

Do you have a question about this Trailer Door Latch?