Tire Repair Tools - 20 Pack, Wheel Masters

Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Shane, yes the replacement metal valve stem part #AM20906 does fit the Aluminum Eagle Trailer Wheel part #LH36VR that you referenced. It comes with fittings to allow it to basically fit all trailer wheel sizes. Did your rubber ones fail?

Hello Joseph, thanks for getting in touch. What I recommend for you is the Americana Metal, Bolt-In Valve Stem #AM20906. This will fit both the 0.453" and 0.625" hole sizes. It is made of chrome plated brass and can handle up to 200 PSI. We…

I am sorry Darrel there is not. It looks like the shortest gooseneck/5th wheel wiring kit for a 2025 Ford F-350 is going to be the 9' long Bargman item #50-97-410-010 you were looking at. They make them that long because some people like to put…

Hey Todd, we have 14 ply trailer tires in the size you have of ST235/80R16 like with the part #TR98VR. Since this is the same size as what you have now it will work on your wheels. Your wheels will also be able to handle the higher air pressure…

Hello Alex, thanks for reaching out. The Goodyear Endurance ST235/85R16 Radial Tire w/ 16" Margay Aluminum Wheel #LH35VR is balanced high side to low side, but they are not spin balanced like car tires. Having them spin balanced is not required,…

The valve stem hole diameter of the wheel and tire part #AM32680 that you referenced is .625 of an inch. For an upgraded valve stem we have the chrome-plated brass part #AM20906 which fits this hole size as well as the smaller size and can handle up…

Measure the diameter of the hole the the valve stem is coming through in the picture you submitted. With that you'll be able to find which valve stem you need. The two common sizes are .453 and .625 inch which the part #AM20906 is a confirmed fit…

Hello Ed, thanks for reaching out. We do offer some 16" 8-lug wheels, but nothing with a 4.80 pilot. For example the Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - White #MX27FR has a 4.88" pilot and a 4,460 lb…

Yes, they will so long as the GM factory TPMS valve stems you're using have a 0.453" valve stem. The Sendel Aluminum Mod Trailer Wheel item #AM22646 you were looking at requires a 0.453" valve stem. Additionally, you'll want to…

The correct replacement bearing kit for a 6,000 lb Dexter axle is the following: - Bearing Kit #BK3-100 This comes with the correct replacement bearings, races, and seal for one hub, so you'd need a quantity of two bearing kits for one axle.