Lock down your bed with Pop and Lock tailgate locks that offer manual or power options. Install can be quick with video guidance; on powered setups, routing and securing the wiring from the tailgate forward takes the most time, and wire colors differ by vehicle. Some options let you match the lock to your ignition key for one-key convenience.
Yes, some allow setting the lock to match your ignition key. Confirm your specific application supports this feature. Note that key removal may not depend on locked or unlocked position. If you need a replacement key later, look for the number stamped into the face of the lock cylinder to request one from Pop & Lock.
Request a replacement key from Pop & Lock using the number stamped into the face of the lock cylinder. If the number isn't available, you can replace the lock cylinder and have a locksmith open the old one to swap cylinders. Keep the stamped code recorded for future key requests.
Installation is generally straightforward and can take about 20 to 60 minutes. Some found videos helpful when printed instructions were missing or hard to read. Be ready for tight automotive connectors; use a small screwdriver carefully to release latches. Routing wiring forward can take the most time. If a bracket hole is slightly off, lightly ream it to fit.
Pick based on how you want to secure the gate. Power styles lock the handle, while some manual styles lock the tailgate to the truck. Decide whether you need the handle disabled or just the gate secured shut. If you want the handle locked, choose a power option. If you only need the tailgate secured to the bed, a manual style can do that.
Start by checking the spring on the lock bolt assembly and make sure the linkage moves freely by hand. If it shivers or barely moves under power, the actuator could be the issue, though that's not common. Verify small screws on the lock tab are tight; a dab of blue Loctite can help prevent loosening. If the truck lost power, apply an external power source at the connector to operate it.
Filters
