Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…
Hey Tony, yes the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR will fit your 2023 Chevrolet Silverado 1500 High Country. This hitch includes everything needed for install, and will bolt right up to your frame. If you need anything else,…
Hi Benito, Even though it's super close that 3/4" difference can cause issues since the spring seats must line up with the hangers welded to the frame rails. We do offer the Trailer Axle Beam with Easy Grease Spindles #e88GR which has a 7k…
If you are just wanting to get new brake assemblies you could use part #AKEBRK-7-SA for 12 x 2 assemblies for electric brakes or part #AKUBRK-7 for hydraulic brakes. These measure 12 x 2 inches so they will fit in the hubs you have now, plus they are…
Slipper spring setups, like parts #e74SR and #APT6SE for 7K axles, do have different hanger sizes so what you'll want to do is cut off the older hangers and do some mock-ups of your new system before installing the hangers. Start off by mocking…
You can switch from a 5-Leaf #e74SR to a 7-Leaf #e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the #MR66ZR which are 7-3/4"…
The Replacement Wireless Remote Control #K2WR100 is designed to be used with the Replacement Winch Control Box for Detail K2 Snowplows #K2WCB. As you have a 4-prong connector you may need a controller like the Bullydog #BDW20212.
To install the Detail K2 Storm II Snowplow - 84" #K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part #K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.
Yes, it does. I spoke with a representative from K2 and he told me the Replacement Winch Control Box for Detail K2 Snowplows, part #K2WCB, does have three prongs. I have included a video review of the Replacement Winch Control Box below.
I spoke with the manufacturer, MORryde, about the dimensions of the MORryde Refrigerator Tray #MR59RR and their tech stated the distance from the ground to the bottom of the tray is 1.61". I can't exactly tell from your photos what your lip…
The Bulldog Collar-Lok Coupler - Gray - Adjustable Channel Mount - 2-5/16" Ball - 12,500 lbs #BD028585 is made in China. Bulldog is a registered brand of Horizon Global Corporation and is based in Plymouth, Michigan. We also offer the Demco…
In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.
Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…
Hey Tony, yes the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR will fit your 2023 Chevrolet Silverado 1500 High Country. This hitch includes everything needed for install, and will bolt right up to your frame. If you need anything else,…
Hi Benito, Even though it's super close that 3/4" difference can cause issues since the spring seats must line up with the hangers welded to the frame rails. We do offer the Trailer Axle Beam with Easy Grease Spindles #e88GR which has a 7k…
If you are just wanting to get new brake assemblies you could use part #AKEBRK-7-SA for 12 x 2 assemblies for electric brakes or part #AKUBRK-7 for hydraulic brakes. These measure 12 x 2 inches so they will fit in the hubs you have now, plus they are…
Slipper spring setups, like parts #e74SR and #APT6SE for 7K axles, do have different hanger sizes so what you'll want to do is cut off the older hangers and do some mock-ups of your new system before installing the hangers. Start off by mocking…
You can switch from a 5-Leaf #e74SR to a 7-Leaf #e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the #MR66ZR which are 7-3/4"…
The Replacement Wireless Remote Control #K2WR100 is designed to be used with the Replacement Winch Control Box for Detail K2 Snowplows #K2WCB. As you have a 4-prong connector you may need a controller like the Bullydog #BDW20212.
To install the Detail K2 Storm II Snowplow - 84" #K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part #K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.
Yes, it does. I spoke with a representative from K2 and he told me the Replacement Winch Control Box for Detail K2 Snowplows, part #K2WCB, does have three prongs. I have included a video review of the Replacement Winch Control Box below.
I spoke with the manufacturer, MORryde, about the dimensions of the MORryde Refrigerator Tray #MR59RR and their tech stated the distance from the ground to the bottom of the tray is 1.61". I can't exactly tell from your photos what your lip…
The Bulldog Collar-Lok Coupler - Gray - Adjustable Channel Mount - 2-5/16" Ball - 12,500 lbs #BD028585 is made in China. Bulldog is a registered brand of Horizon Global Corporation and is based in Plymouth, Michigan. We also offer the Demco…
In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.
Cutting Edge Parts are essential for maintaining the efficiency and longevity of your snow plow. These parts ensure a clean scrape and protect your plow from wear and tear. Perfect fit and easy installation make them a top choice for enthusiasts looking t
Yes, most Cutting Edge Parts come with pre-drilled holes that align perfectly with your plow, making installation a breeze. Many enthusiasts appreciate the straightforward process, which often requires minimal tools and time.
By providing a robust and sharp edge, Cutting Edge Parts reduce the wear on the plow itself, preventing damage and extending its lifespan. This means less frequent replacements and more reliable performance over time.
Cutting Edge Parts enhance the plow's ability to clear snow efficiently by providing a sharp, durable edge that cuts through snow and ice. They protect the plow from damage and wear, ensuring a longer lifespan and consistent performance even in tough conditions.
Cutting Edge Parts are often made from high-quality steel or composite materials, offering excellent durability and resistance to wear. These materials ensure the cutting edge can withstand harsh conditions and heavy use without compromising performance.
Consider the compatibility with your specific plow model, the material of the cutting edge for durability, and the ease of installation. Many find that pre-drilled holes and a straight edge design make installation straightforward and ensure a perfect fit.
Filters
