Replaces the 1/2" thick cutting edge on the bottom of your Fisher snow plow. High-carbon steel breaks apart ice and scrapes away packed snow while you're clearing parking lots or driveways. Comparable to Fisher part number 50678 or 50625.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. And today we're gonna take a look at this replacement cutting edge for Fisher snow plows. Now, this is going to replace the half inch thick cutting edge on the bottom of your Fisher snow plow. As you know, this is going to mount to the bottom of your blade to break apart ice and scrape away packed snow while you're clearing parking lots or driveways. Now, this is comparable to the Fisher part numbers that you see there on your screen, 50678 or 50625. Now, this is made here in the USA.
It is constructed of C1090 carbon steel for premium strength and heavy duty impact resistance. The Brinell hardness number range is from 250 to 300 and this features a black powder coat finish. It's going to help resist corrosion. And let me go ahead and find my tape measure here and give you some overall measurements so you can be confident that this is going to work for you. Let me see if I can hold my tape measure in place there on the one end and bring this all the way out.
So as you can see, we are sitting right at 90 inches, maybe you can see, but this is 90 inches long and six inches tall. And as I mentioned, this is half an inch thick. You have 1, 2, 3, 4, 5, 6, 7, 8 holes from mounting. And the distance between these mounting holes on center is 12-7/16 inches. And the mounting holes do accept half an inch in diameter carriage bolts and those bolts are not included.
But if you need to pick some up, on your screen, I am including the bolts that will fit this blade. And you can take that item number that you see there on your screen and put it in the search field of our website and that will take you to those bolts and you can add them to your order if you are in need of them. Now, I do wanna mention that additional measurements are available on this product page if you are in need of more measurements that I did not provide for you today. And in case you were interested in the weight, I needed help carrying this into the studio and putting it on the table. This is almost 75 pounds or so, so it's got a good weight to it.
Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.