Hey Michael, yes a 7k Roadmaster Comfort Ride kit part #RM-2460-2570 would work on a 6k axle setup as they both have the same diameter axle of 3 inches. We do also have a 6k version with the part #RRM49NQ or are you wanting to increase the suspension…
Hey Wyatt, That ARC13AACWL2 unit you have looks like it uses the old R410a refrigerant. Unfortunately this past year all the RV Ac manufacturers switched to an R32 refrigerant which is no longer compatible with the old R410a. With that said we do not…
I have the perfect solution for you with the RockyMounts AfterParty Swing Away Bike Rack for 2 Bikes #RKY37ZR. This platform rack matches perfectly with what you're looking for, includes locks, and also uses a newer style upright arms that secure…
The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…
Good morning Jay, I got that part added for you here Cummins Onan EC-AGS+ Auto Generator Start System - Bluetooth - Gas RVs #CM96MR. This will allow some select models (including your LP 5500) of Onan generators to be remote-started from an app based…
The part number you listed is a Coleman Mach AC unit so that means that the replacement shroud part #MA00-325001 would be the correct shroud replacement.
Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…
To replace your Lippert Turning Point with a Gen-Y gooseneck pin box you'll need to match the bolt pattern and pin weight of your 5th wheel trailer. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert Turning Point - 21K -…
Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…
Hello Richard, Congratulations on the KZ Confluence 18RB! That is a really nice camper, and I like that KZ packed quite a bit into an 18-foot floorplan while still giving you a slide for some extra room inside. Yes, installing the etrailer RV…
As the Curt C17342 weight distribution system was discontinued at the end of 2016, there will be no more direct replacement parts available for it, unfortunately. However, The bars that fit the Curt replacement head #C17507 will be a 1-5/16"…
Hi LaRue! The etrailer RV Slide-Out Topper #e67QV does include the awning rail track. This is everything you need for a complete slide-out topper installation. If you already have Solera mounting brackets installed from the factory, you will also…
Set up a fixed dump point with permanent adapters that give your RV sewer hose a solid, positive connection to a home or site inlet. Some connect to a 3 inch threaded plumbing pipe and accept a standard bayonet connection, so match your pipe size and fitting style. Consider caps for bayonet and elbow fittings to seal things up between uses.
Inspect the glued joint before installing and re-glue if it feels loose to ensure functionality. These adapters are plastic, so avoid over-tightening. Dry-fit on the 3 inch threaded pipe first, then secure and check the bayonet fit. Using a cap for bayonet or elbow fittings helps keep the connection clean between uses.
Yes, Permanent Adapters can ensure a positive connection between an RV sewer hose and a home sewer line inlet. Confirm your RV outlet uses a 3 inch threaded plumbing pipe. Make sure your hose has a standard bayonet end to connect securely. Add a matching cap when not in use to keep things tidy.
A Permanent Adapter can add the bayonet-style attachment you need. If your camper has a permanent-style drain valve or just a 3 inch threaded pipe, install the adapter to connect your hose. Check that the hose has a standard bayonet connection. Test-fit before your first dump to confirm a snug lock.
Yes, Permanent Adapters connect to a 3 inch threaded plumbing pipe and let you attach a hose with a standard bayonet connection. Verify your RV outlet is 3 inch threaded. Check that your sewer hose uses a standard bayonet connection. If you have a permanent-style drain valve, this adds the bayonet attachment you need for dumping.
Filters
