Hey Frank, we have the GE Appliances Microwave part #GE57HR that is close enough in size that it would work great to replace the High Point Micro/Convect oven EC028KD7. This is just a microwave so if you were wanting also the convection oven portion…
We sure do Dan. The Furrion Microwave Trim Kit item #FR85TF is exactly what you need for the Furrion Built-In RV Convection Microwave and Air Fryer item #FR63TF in black. The Furrion Microwave Trim Kit item #FR85TF is black and measures 24-3/16"…
Hey Rick! The EcoHitch Hidden Front Mount Trailer Hitch #EH69CR weighs 72 lbs with the hardware. This is confirmed to fit your 2024 Ford Transit T350. What will you be using the hitch for?
The High Pointe Built-In Convection Microwave with Air Fryer #HP36ZR will fit as a replacement for your current ECO28KD7. It does appear the new unit will easily fit into place but as the RV manufacturer can build 2 units at the same time and they be…
Welcome back Rich and thanks for the information! To replace your Sharp Carousel microwave R-820BK-F, I recommend the Greystone Built-In RV Convection Microwave item #GR27FR. It measures 21" wide x 11" tall x 15-3/4" deep.…
The MCG1311ARB microwave that you mentioned is a 1.3 cu ft stainless steel unit rated for 1,000 Watts. The closest thing we have to that is the Greystone #324-000106 which is a 0.9 cu ft stainless steel unit rated for 1,350 Watts. The Greystone can…
Hello Dennis. The trim piece for the High Pointe Built-In Convection Microwave measures 24" wide by 17" tall. I made a diagram for you which I have included below.
Hey Lee! The Furrion Built-In #FR77AD requires a cutout measuring 20-1/2" wide, 13-3/8" high, and 17-3/4" deep. Since we don't have a way of knowing how much space you have you will need to measure and see if it will fit. As long…
The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as it's the correct dimensions and also works great. We also have it in black with the part #HP99ZR.
Wayne, it does not look like the Greystone Built-In RV Convection Microwave #GR27FR include a mounting bracket. I actually wasn't able to find one at all for that model. They make one for their smaller #324-000106 microwave, but nothing for the…
For your 2019 Forest River Forester Motorhome, check out the: -Greystone Standard RV Microwave w/ Trim Kit #324-000106, & -The Furrion Over the Range RV Convection Microwave #FMCM15SS. Either of these microwaves will work great in your motorhome,…
That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Ready for a straightforward replacement, these RV microwaves provide 1000 watt output for dependable cooking on the road. For a clean install, match your cutout and confirm if a trim kit is needed; some setups reuse existing trim screws. If you're comparing options, note that other RV microwaves can be 900 watt output, so pick the wattage that fits your needs.
You can often reuse existing trim if the new microwave face and cutout match. Keep the original trim screws, since you may need them to secure the surround. For new trim, confirm dimensions like 24" wide by 17" tall align with your opening. Dry-fit the unit and trim, then secure once the microwave is fully seated.
Measure your cabinet cutout and compare to the trim you plan to use. A common trim piece measures 24" wide by 17" tall. If reusing your old trim, keep the 4 screws that secured it to the microwave. Check depth and outlet access, and if access is tight, tie a thin rope to the power plug to pre-feed it to the 110V receptacle before sliding the unit in.
Yes, installation can be straightforward if the cutout and trim match. Bench test the new oven first so you know the door opens and it functions before removing the old one. Watch sharp edges and plan for the weight when lifting. If the microwave is at eye level, pre-stage the plug so you can reach it once the unit is in the opening.
Test the unit on a bench to confirm the door opens and controls don't stick. Verify you have the mounting hardware you need—some setups require side screws for the frame that may not be included. Remove the trim before sliding the old unit out, and reinstall it just before the final slide-in to avoid binding.
Filters
