Hi Darrin! The MORryde RV Cargo Slide Tray - 90" x 23" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR78RV can clear a lip up to 1.57 inches, so call it 1-1/2 inches to be safe. If you need it to be higher, we do also have the Height…
Hey Bob, thanks for reaching out, and good question. For that setup, as long as the tray is properly secured in the portion that is touching the floor, it will be just fine. It might be a bit more difficult to install since you can't secure the…
Hey Ethan. From the mounting point of your RV to the top of the carpeted base is going to be 2.31" on the MORryde RV Cargo Slide Tray item #MR78RV. The bottom of the tray sits 1.57" above the mounting point on your RV and the wooden base is…
Hi Chuck! The MORryde RV Cargo Slide Tray - 72" x 26" - 1 Way Slide - 60 Percent Extension - 800 lbs #MR67FR sits 1.6 inches above the floor you mount it on. If you want or need it to be a bit higher off the floor, you can also grab the…
Hey Tim. The 48" x 23" measurement is the entire MORryde RV Cargo Slide Tray item #MR63ZV. The inside tray dimensions are 46-1/4" long x 19-7/8" wide. The MORryde RV Cargo Slide Tray item #MR63ZV has a 800 lbs capacity and slides…
Hey Richard, I wish there was a way to lock out the MORryde sliding cargo trays like the part #MR76FR in the extended position but that's just not a feature they have. They can lock in the retracted position but not extended. Are you loading…
Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…
You can go with a listed 29" model of the MORryde RV Cargo Sliding Tray as its actual width is 28-3/4". Please note the attached image showing dimensions of width. We have the #MR69FR that is 90" in length by 29" wide and has a 2…
Hey Jeff! For a replacement I recommend the etrailer Electric Trailer Jack #e23ZV. This is a direct replacement with the same 18" lift and 3,500 lb capacity as your FIC-ETJ3500-LP10. If you want something with a little more power we have the…
Hey Arthur, The dimensions I'm seeing for a 3500watt Predator Generator show it being 22.8" L x 17.3" W x 20" T so if you're wanting it to sit with the 17.3" side facing out the closest fit would be the MORryde RV Cargo…
While there is no visual guide available to determine the sizing for the MORryde sliding cargo trays like the #MR38FR, it really depends on the height, length, and depth of your RV compartments opening. The #MR38FR that you were looking at, for…
Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…
RV Cargo Slides for 72 Inch Long bays with 60 Percent Extension
Get quick, organized access in deep storage with 72 inch long trays matched to 60 percent extension. Installation is straightforward and operation is smooth and solid, making it easy to manage tools and camping gear. Measure your opening height and any door lip to confirm clearance, and pick a weight rating that fits your load, with options from 300 lbs - 500 lbs and up to 800 lbs.
They lock in the stored position and have a built-in stop at the extended position. They don't lock in multiple positions. If you need the load to stay put while extended, plan your loading so weight is balanced and within the tray's listed capacity.
Plan on the tray floor sitting about 1.6 inches above the mounting surface on some 72 inch options, with overall height around 6-5/8 on a similar size. Measure from your bay floor to the top of the opening and subtract the listed height. Check for a door-frame lip or a low center cross support; a small spacer, like 3/8 inch, can help clear obstructions.
Installation is generally straightforward. Reviews call out easy installs, smooth operation, and plenty of hardware. Pre-measure your clearances instead of test-fitting the whole unit, since the assembly is heavy. Having two people makes positioning and fastening simpler and helps avoid scraped compartments.
Yes, if your compartment depth meets 72 inches and your width matches the tray you choose. Follow the measuring instructions for internal and external dimensions to confirm fit. Check the opening lip height versus the tray's height off the floor; if the center support is low, add shims to clear the door frame.