Hey Gary, welcome back! The Ventline Roof Vent item #V2128SP-01 is our only option for a 120v roof vent. It will work great with the AC power you have currently in your trailer. The Ventline item #V2128SP-01 has a manual lift that can be opened by…
I have seen several people use the Mounting Bracket #HM40978 to relocate the 7- and 4-Pole Trailer Connector Socket #HM40975 on their 2019 Toyota 4Runner to a more easily accessible location. I have linked a image below showing where they remounted…
The Curt Trailer Hitch #C13900 that you referenced is a Multi-Fit option, which means that while it can indeed be installed on your Blazer according to Curt, it is going to require some modifications/drilling for proper attachment. I have attached an…
Yes, the Curt Trailer Hitch Receiver part #C13300 fits all models of the 2002 Chevy Blazer without drilling and a 400 lb tongue weight capacity so it is a nice choice. If you need wiring, I recommend Curt Vehicle Wiring Harness with 4-Pole Flat…
I don't have an exact dimension I can give you but if you check out the picture I attached that shows the Curt hitch part #C15802 installed you can see that it installs basically in the exact same location as the factory hitch.
The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…
Hello Chris, Great question! To be honest, I could not find anything that was listed different so I reached out the manufacturer to get the answer. The difference between the two is one has a check valve and the other is just a pass through. The…
I can say that Curt doesn't consider the hitch a fit, but if you look at the provided photo, you can see the mounting hole spacing on the hitch and compare it to the frame member of your truck.
We do offer replacement mirrors, like CIPA Rearview Mirror #CM33000, but we do not offer the glass as a separate item. Rear view mirrors come in wedge-style and cam-lock styles. (See image) Both use a slide-in fitment for the mirror's base to…
The K-Source Panoramic Mirror, Part #KSRM012, is intended as a universal fit item that will fit a majority of original equipment mirrors. If the rear view mirror of your Acura TL is between 2-1/8 and 2-7/8 inches tall and no thicker than 3/4 of an…
8 Inch Long
8-1/2 Inch Long
10 Inch Long
12 Inch Long
Rear View Mirrors Parts or Accessories
Filters
