Hey Gary, welcome back! The Ventline Roof Vent item #V2128SP-01 is our only option for a 120v roof vent. It will work great with the AC power you have currently in your trailer. The Ventline item #V2128SP-01 has a manual lift that can be opened by…
Yes, the Curt Trailer Hitch Receiver part #C13300 fits all models of the 2002 Chevy Blazer without drilling and a 400 lb tongue weight capacity so it is a nice choice. If you need wiring, I recommend Curt Vehicle Wiring Harness with 4-Pole Flat…
The Curt Trailer Hitch #C13900 that you referenced is a Multi-Fit option, which means that while it can indeed be installed on your Blazer according to Curt, it is going to require some modifications/drilling for proper attachment. I have attached an…
The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…
I don't have an exact dimension I can give you but if you check out the picture I attached that shows the Curt hitch part #C15802 installed you can see that it installs basically in the exact same location as the factory hitch.
I have seen several people use the Mounting Bracket #HM40978 to relocate the 7- and 4-Pole Trailer Connector Socket #HM40975 on their 2019 Toyota 4Runner to a more easily accessible location. I have linked a image below showing where they remounted…
Hello Chris, Great question! To be honest, I could not find anything that was listed different so I reached out the manufacturer to get the answer. The difference between the two is one has a check valve and the other is just a pass through. The…
I can say that Curt doesn't consider the hitch a fit, but if you look at the provided photo, you can see the mounting hole spacing on the hitch and compare it to the frame member of your truck.
The K-Source Panoramic Mirror, Part #KSRM012, is intended as a universal fit item that will fit a majority of original equipment mirrors. If the rear view mirror of your Acura TL is between 2-1/8 and 2-7/8 inches tall and no thicker than 3/4 of an…
The tallest clip on style of mirror we offer is the K-Source Panoramic Aspheric Rearview Mirror #KSRM1300 which can fit over mirrors that are up to 3-1/2 inches tall. Since that doesn't seem to be tall enough a full mirror replacement like the…
Filters
