Hey Adam, that's clever use of a snake camera! That is definitely a Bladex setup that you have which we have replacement valve bodies for with the part #T1003DSPB if that's what you are looking for.
Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…
Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…
Hi Mark; according to Lippert the Thomas Payne RV Jackknife Sofa #TP86KR is a "wall hugger." This means it can sit right up against the wall in the upright position. You don't need a certain amount of space behind it.
The Surco RV Ladder Mounted Bike Rack you referenced attaches to the uprights of the ladder, not the rungs. As long as your uprights have a round profile, the ladder bike rack will fit regardless of the profile of the rungs. I have edited a photo for…
I went out to the warehouse and pulled the Lippert Waste Master RV Sewer Hose #LC359724 to measure the 90 degree end with the lever and handle. The overall length from the furthest point forward to the end of the handle is 8 inches. The overall…
Yes, the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long #LC359724 can be stored in your bumper without worry of the heat causing it to go bad. The only thing you need to have is the right amount of space to store…
The Lippert Waster Master RV Sewer Hose, #LC359724, is designed to be stored in the under bin compartments of RVs. The hose and nozzle will not fit in the bumper style storage tubes. I do have a solution for you. The Valterra Viper RV Sewer Kit…
Hey David, congrats on the new truck! I've got another option but the DeeZee item #DZ36GJ isn't going to work with a spray-in bed liner. The textured surface of the spray-ins causes the mat to slide around and moisture, along with debris gets…
Hey Mike. For a 5th wheel trailer that long, I recommend using two of the MORryde I-Beam Mounted Stabilizer item #MR96RV. Mounting one of these in the front a few feet back from your landing gear and then one in the back is going to take care of any…
Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Filters
