Is there a Seal Kit for the Lippert Replacement Hydraulic Cylinder for RV Slide-Out?

Question

Question:

Is there a seal kit available for these cylinders?

asked by: Tom

0

Expert Reply:

No, I am sorry Tom there is not. Lippert does not provide a seal kit for the Lippert Replacement Hydraulic Cylinder for RV Slide-Out item # LC342328.

expert reply by: Jerred H

0

Jerred H.

11/17/2025

Hey Tom, were you able to find another way to repair your hydraulic cylinder without a seal kit? Knowing what worked could help others facing the same issue.

Answer 1

I wasn't able to find any specs on the Magic Chef CLY222OBDB you mentioned, but the Furrion 2-in-1 Range Oven #FR97KR is a great replacement oven as long as the cutout you're putting it in is 21-1/2" Wide x 21-1/2" Tall x 20"…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 9

Hey Brad, thanks for reaching out. The factory brake controllers they put in the 2015 GMC trucks are largely incompatible with EOH brakes. That is one of the specific model years we see a lot of issues with since they don't have an EOH mode.…

view full answer...

Answer 10

Hey Randy! I can definitely set you up with air bags and a compressor. I recommend Firestone since they make the most durable and reliable air bags. For a complete kit with an air compressor you can choose from the following: -Firestone Ride-Rite Air…

view full answer...

Answer 11

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 12

Hey JB, The Firestone Ride-Rite Air Bags #F64XV are the correct airbags for your 2024 GMC Sierra AT4 trim. These are a no drill installation and bolt right up to your vehicle. With the on board compressor you can air up at any time. This kit is also…

view full answer...

Is there a Seal Kit for the Lippert Replacement Hydraulic Cylinder for RV Slide-Out?

Product Page this Question was Asked From

Continue Researching