Hey Edwin, The Skylight #SR89YR will work perfectly fine with your 1-1/4" thick roof on your 2018 Lance 1575, though they typically will require some trimming to the garnish to fit perfectly. You will want to pick up 2 tubes of self leveling…
Happy to help Bruce H, To install the Specialty Recreation Skylight we'd recommend using the Specialty Recreation Skylight Installation Kit #SR76RR. Years ago, most RV skylights were usually installed with butyl tape under the flange and self…
Hey James! The tallest skylight we have is the Specialty Recreation Replacement RV Skylight w/ Inner Garnish item #SR66MR. It's designed to replace an existing skylight but it will work to add a new one as well. It fits a 14" x 22"…
Hey Michael, You do not want to use self-leveling sealant with the Specialty Recreation Universal Replacement RV Skylight - 14" Wide x 22" Long - Smoke #SR67RR because it is made from polycarbonate, which doesn't mesh well with that…
Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV92SR in white or item #ADV62SR in black. There's no way to just replace your AC unit…
Hello Robin, thanks for reaching out. The Thomas Payne Heritage Three-Seat Reclining RV Couch #TP43KR weighs approximately 200 lbs altogether including all 3 sections. What kind of RV is it going in?
Hey Kevin. Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is just the replacement fabric. It'll attach to your existing awning roller so long as you have a 20' powered awning. There is no stitching built into the fabric for…
Hey Adina, from what I could find the Norcold N811F requires a cutout that is 60" high x 23-1/2" wide x 24" deep. I would double check your opening just to be sure but based on those dimensions I recommend the Norcold RV Refrigerator…
Hey Brad. You'll be wanting the Curt Adapter #C88KR. This will fit into the OEM pucks of your '25 Chevy 2500HD and will allow you to reuse your B&W Patriot Sliding Hitch. What camper are you towing with your truck?
Hey Dan, There unfortunately isn't a guide to tell us what size skylight dome your trailer has installed on it so you'll need to measure your current one to find the correct replacement. We offer the following sizes: 14"W x 14"L…
Hello Kayla, I am so glad you wrote in to us! I was able to confirm with MCD Innovations that you will need the MCD Innovations RV Shade Repair Kit - Solo with Steel Brackets - Switch Controlled Motor #MC82YR to replace your current motor…
Hi Chad; I'm sorry to hear you have to replace your skylight. What happened? The good news is we do have a replacement available. The Specialty Recreation Universal Replacement RV Skylight #SR77RR is designed to fit a standard 14" wide x…
Great product. fast, professional, and well communicated service. it was a pleasure buying from y'all. thanks again
Tom
Fort Collins, CO
Rectangular RV Skylight with Inner Garnish
Refresh your rig with a rectangular rv skylight that matches measured roof cutouts for a clean, simple upgrade. The included inner garnish finishes the ceiling opening and typically will require some trimming to the garnish to fit perfectly with your roof thickness. Installation is straightforward—measure carefully and seal the perimeter with self-leveling sealant for a watertight result.
Yes, some inner garnishes are available separately. Match by the skylight's style and cutout size, such as 14" x 22". Verify the roof thickness so the replacement garnish trims to a snug fit, and confirm it's the low profile or style you need before ordering.
Measure the roof cutout and match it to the skylight's required cutout, like 14" x 22" options. Check your roof thickness; 1-1/4" roofs can work, though trimming the inner garnish may be needed. If replacing, carefully remove old sealant to avoid damaging roofing material and dry-fit before sealing.
Installation is straightforward for many swaps. Take your time removing old sealant to protect the roof, and test-fit to see if the inner garnish needs trimming. Have enough self-leveling sealant—2 tubes are often suggested—and confirm if hardware is included; you may need to source new fasteners.
Yes, a 1-1/4" roof can work, and trimming the inner garnish is typically needed to fit cleanly. Verify the skylight's roof thickness range and be ready to fine-tune the garnish. Plan enough self-leveling sealant and check for a watertight seal around the flange.
Filters
