Coleman RVP 7000 Series Air Conditioner Replacement Cover

Question

Question:

Is replacement a/c cover MA8335A5261 the correct choice to replace rvp 7000 series coleman model no. 7623B8764 ser.019813657 ?

asked by: Troy M

1

Helpful Expert Reply:

The correct replacement cover for your RVP 7000 Series Coleman AC unit is in fact Item # MA8335A5261.

I have added a link to a review video so you can take a closer look.

expert reply by: Shane H

1

Answer 1

For your RVP 7000 / 8000 series AC on your 2002 Keystone Hornet you can use the Replacement RV Air Conditioner Cover for MaxxAir Units #MA8335A5261 for a replacement shroud.

view full answer...

Answer 2

Hey Kim, The thickness of the LaSalle Bristol XTRM PVC Membrane in the #344270KIT21 kit is 27 mils, or 0.027" thick. The membrane itself has a 15 year warranty that is handled by LaSalle Bristol directly! What kind of trailer are you wanting to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Coleman RVP 7000 Series Air Conditioner Replacement Cover

Featured Help Information

Miscellaneous Media

Continue Researching