Hey David, we have the replacement screen for the Maxxair II vent with the part #MA10-20121 that you referenced but we do not have the frame as well. If the frame is damaged as well you'd need to replace the entire lid cover with the part…
Hi Nick, great question. Yes! The Air Lift LoadLifter 7500 XL part #AL89DQ will work great with your in-bed B&W Turnoverball hitch. They install in separate locations, so there won’t be any interference so you’re good to go there. Out of…
To ensure that the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR you will want to verify that your 2019 Keystone Cougar 315RLS does have 1621 pin box. The easiest way to confirm this is by the sticker that is on the top of the…
Coupler #CA5100B measures 9-1/4 inches wide at the widest part. I have included a picture showing some dimensions for you. For coupler #CA5400 is measures 11 inches wide at the widest point. I have included links to the video reviews of these…
Hey Travis, thanks for reaching out! You'll definitely want to apply grease to the gooseneck hitch ball whether you're towing a gooseneck trailer or your 5th wheel with the Gen-Y Adapter Box #GY72SB. I spoke with Gen-Y and they said they…
...Hi ,
I had a travel trailer that was powered by 30 amps and I had a surge protector for it. I traded that travel trailer for a new one and it is powered by 50 amps. Do I now need to buy a surge...
Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…
We do have 6-Pole Square Trailer Wiring Connector Kit (Car and Trailer Ends) #37995 that you can use for your Arctic Fox camper. This is both the male and female ends. But the wires on them are 18 gauge. You could replace the ground and power wires…
Hello Jacob, thanks for reaching out. There are a lot of different locks that can work with the Demco Ez-latch coupler. To be honest, any lock can be defeated, it is just a matter of how difficult the lock would be to defeat. A really good all-around…
According to Lippert that is a 6,000 lb hub and drum assembly with a 6 on 5-1/2 bolt pattern using #25580 inner and #15123 outer bearings. You do not need to use a replacement part from the same manufacturer so for a replacement you can use the…
...Hi.
Motorhome 2005 ford Miranda. 30 amp.
I want to know if that plastic box works with this Motorhome.
Thanks.
Im in Provo, Utah. You have any store here...
Extend Your Reach with 30 Amp to 30 Amp RV Plug Adapters
Perfect for those moments when your RV is just out of reach from the shore power. These adapters let you connect two 30 amp cords, creating a longer connection without the need for costly replacements. Ideal for travel trailers and home setups, they ensure your cords stay straight and functional.
These adapters are a lifesaver when your RV is parked just a bit too far from the power source. By connecting two 30 amp cords, you can extend your reach without buying a new, longer cord. This setup is perfect for both travel trailers and home use, keeping your cords straight and reducing wear.
Using a 30 Amp to 30 Amp adapter plug allows you to connect two cords, creating a longer power line. This is especially useful for those occasional situations where your RV is parked further from the power source. It saves money and prevents the need for a new, longer cord that might only be used a few times.
To ensure longevity, consider wrapping the adapter to make it weather-tight, especially in wet conditions. This prevents water damage and extends the life of the adapter. Also, be mindful of sun exposure, as it can cause color fading over time, though this doesn't affect functionality.
Choosing a 30 Amp to 30 Amp adapter is ideal for those who need flexibility in their power setup. It allows you to extend your reach without investing in a new cord, making it a cost-effective solution for occasional use. Plus, it helps keep your cords from bending, prolonging their lifespan.
By using a 30 Amp to 30 Amp adapter, you can connect two cords to create a longer, more manageable power line. This setup prevents cords from bending and twisting, which can lead to damage over time. It's a practical solution for maintaining the integrity of your power cords.
Filters
