You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…
Since the Atwood 31013 LP Detector has been discontinued you can replace it with the RV Propane Gas Detector - 12 Volt - 2 Wire - Black #RS44FR. This detector is a surface mount design and can easily swap out your old unit in just a few minutes.
Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…
We do have a couple of options to replace your Atwood 36636, and you can use either, with the only difference being the color: - RV Propane Gas and Carbon Monoxide Detector - Black #RS54FR or White #RS34FR Either will work perfectly as replacements…
I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…
Hi Brenda, The Atwood 31013 unfortunately has been discontinued so you'd need to go with a completely new LP gas detector. We have a couple of surface mount style detectors that come with trim rings that will cover the old unit's cutout hole…
Hey Jeff, thanks for reaching out! Yes, if you buy the RV Propane Gas and Carbon Monoxide Detector #RS54FR right now in 2025 and install it, it will last until 2030. Did your last detector go out, or are you just looking to get your RV ready for…
Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
RV gas detectors with indicator lights are essential for safety, offering clear visual alerts for propane and carbon monoxide detection. Easy installation and reliable performance make them a must-have for peace of mind on the road.
Indicator lights provide immediate visual feedback on the detector's status, ensuring you can quickly assess if there's a gas leak or if the device is functioning properly. This feature is crucial for maintaining safety and peace of mind while traveling in your RV.
Installation is straightforward: connect two wires to the existing 12V wiring, secure with wire nuts, and mount with screws. Ensure the detector is placed where airflow won't interfere with its operation, like away from open windows, for optimal performance.
Newer models offer improved reliability and features like indicator lights, which enhance safety by providing clear alerts. They also fit seamlessly into existing setups, covering old holes and ensuring a neat installation, making them a smart upgrade for any RV.
If the detector doesn't alarm, check its placement and ensure it's not in an area with excessive airflow, which can prevent detection. Regularly test the unit with a safe gas source to confirm it's working correctly and replace it if it fails to respond.
These detectors provide real-time alerts for gas leaks, allowing you to take immediate action. The indicator lights offer a quick visual check of the detector's status, ensuring you're always aware of any potential hazards, which is vital for safe RV travel.
Filters
