...and it automatically latches. The only time you need to get in your truck to mess with the coupler is when you need to unlatch it.
For something a little more traditional, we also have the Convert-A-Ball...
Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
Hey Eric, thanks for reaching out. I went out to our warehouse and measured the Demco eZ-Latch Gooseneck Coupler #DM43KV. From the bottom edge of the coupler to the center of the first adjustment hole was 10-3/4". Then the adjustment holes are…
Hello Danny, Does that mean that your trailer is bigger than all the others, just like everything else in Texas..... bad joke, I know. I have not heard of any issues with the Texas Pride and not being able to use the Demco eZ-Latch Gooseneck Coupler…
Hello Jerry, Great question. It all depends on on if it is compatible. If your current set up is not a topwind coupler then it isn't going to work because the #GCSQTW-30008 does not use traditional pin-adjustment holes (please refer to picture I…
It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…
Hello David, thanks for reaching out. The Curt Offset Ball #C68ZV will fit the 2024 GMC 2500, but it will only work on the 8' bed models. If you have the short bed, an additional piece, Curt part #60669 is required. The problem is this part will…
Hi Brandon; the Replacement Jack Screw and Nut Kit for Bulldog Sidewind Trailer Jacks #BD500217 is the correct replacement for the #BD182815. The gear kit #BD500212 is also available if you need replacement gears as well.
I do have an option for you but there is not a direct replacement for the Glo-Brite Tail Light 1237-88AC as Glo-Brite is no longer in business. Therefore, your only option would be to switch to a different style like the Bargman LED Trailer Tail…
To repair a Ram Series 12000 jack, like #TJD-12000SP-R2, we have the Gear Kit #TJD-12000-GR or the Replacement Rod and Nut #TJD-12000-RODNUT. Or you could need both. I just depends on what the problem is exactly.
The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…
Explore the robust and adaptable gooseneck couplers with outer and inner tubes. Perfect for replacing worn-out hitches, these couplers offer a sturdy fit and are built to withstand thousands of miles. Ideal for enthusiasts looking to enhance their trailer
Absolutely, these couplers are versatile and can be used with various trailer types, including flatbed and 5th wheel campers. Their adjustable nature makes them a great choice for customizing your trailer setup.
Yes, installation is straightforward and can often be completed in about 10 minutes. The design allows for a snug fit, and many find it a perfect replacement for older, worn-out hitches, getting their trailers back on the road quickly.
The outer and inner tube design provides enhanced stability and strength, making it ideal for heavy-duty towing. This design allows for easy adjustments and a secure fit, ensuring your trailer remains safely attached over long distances.
These couplers are built with heavy-duty materials and robust construction, ensuring they can handle significant weight and stress. Their design is perfect for long hauls, providing reliability and peace of mind on the road.
Expect a long-lasting product that holds up well over thousands of miles. The couplers are designed to resist wear and tear, providing a reliable connection that stands the test of time, even under heavy use.
Filters
