Hey Clay welcome back! The correct grease seal for your Dexter 5,100 lbs axle is item #DX72UR. This is a pair of seals that are sized specifically for your 5,100 lbs axles spindles. These are manufactured by Dexter and matches their OEM parts. If…
Hey Jason, welcome back! The 15" x 6" Dexstar Steel Mini Mod Trailer Wheel item #AM20537 will work if you have 2" or more clearance between the side wall of your current tire and your trailer's frame. This wheel is only going to be…
Thanks for your question, Shannon! I reached out to SnowBear to confirm which blade would be the replacement part. They let me know that part #K2SB8200 is the correct part you would need. It comes as 3 pieces totaling to the 82" that your plow…
They Thomas, I'd be glad to help you pick out which tire pressure monitor system would be better for you. So generally what we have found is that the TST system part #TST-507-RV-4-C is a bit more rugged and will withstand a little more abuse…
Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hey Steve. To replace the remote on your SnowBear Snowplow for 2" Hitches item #K2AVAL8219, you'll need the Replacement Wireless Remote Control for Detail K2 Snowplows item #K2WR100. The remote is programmed specific to the black solenoid…
Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…
Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…
Hey Hugh! You do not need metal valve stems to use the Tire Linc Pro TPMS for RVs and Trailers #LC67VC. This uses cap sensors so they're light enough to work with any valve stem. Metal valve stems are typically recommend for flow through sensors…
Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the…
Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…
Hey Greg! We definitely have something that will work for your 2018 Forest River travel trailer. Since everything switched to the new R32 refrigerant this year following the 2025 EPA guidelines you will need a complete system. For a low-profile…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Emergency Supplies with Warning Emblems for Visibility
Bright options help mark slow-moving vehicles clearly, and warning emblems with highly reflective red edges boost visibility. Choose adhesive stickers that stick well to glass or bracket-mounted signs that fasten to a tractor with carriage bolts. Durable enough for regular use, including on ATVs where required by the county.
Yes, the red edges are highly reflective, which helps visibility. Place the emblem where it's clearly seen from the rear. Keep it clean to maintain reflectivity, and confirm it meets any county or local requirements for ATVs or slow-moving vehicles.
Yes. Stick the emblem to magnetic sheeting and trim the sheeting to size for a removable setup. Choose strong, outdoor-rated magnetic sheet and clean both surfaces before bonding. Check the emblem's corners and trim if needed for a clean edge.
They can use a bracket that attaches with included carriage bolts and a spade that slides into a socket-style mount. Verify your tractor's mount accepts a spade and socket setup. Tighten the hardware securely and check alignment so the emblem faces straight back.
Yes, adhesive Warning Emblems can stick well to a back window or body panel. Clean the surface and press firmly to help them set. If you want a removable option, adhere the emblem to magnetic sheeting and trim to fit. Inspect corners before applying; a quick trim can square them up.
Filters
