SureCall boosters for rv work with major North American carriers and 3G, 4G LTE, and 5G, and they can improve hotspot performance. They must be registered with your carrier and need an existing signal—generally within 30-50 miles of a tower—to boost. For install, keep antenna separation (14'-16' is fine), mount the outside antenna with a 12" clear radius, and avoid using Winegard 360+ factory cables.
Yes, SureCall RV boosters are compatible with all major North American carriers and with 3G, 4G LTE, and 5G connections. If you're in a fringe area, they can help strengthen usable signal. If you see little change, check that a signal is present to boost and confirm antenna placement and separation.
Yes, a SureCall RV booster can improve signal strength for a hotspot and they work in tandem. Your hotspot can still choose which provider if it already has that function. Keep the hotspot 3-5 feet away from the booster to avoid interference.
Yes, you need to register the device with your mobile carrier, and a signal must be present for it to boost. Generally, being within 30-50 miles of a tower helps, but terrain and other factors matter. These are not satellite devices; if there's no signal, there's nothing to amplify.
Separation in the 14'-16' range is plenty to help prevent oscillation. There isn't a specific distance listed, and systems have worked with less space in similar installs. If you experience feedback or poor performance, recheck antenna spacing and orientation.
Mount the outside antenna in a spot with at least a 12" radius clear of obstructions and aim it vertically. Mount the booster in a cabinet or side panel near power, avoid excessive heat, direct sunlight, or moisture, and allow ventilation. Route cables on a direct path and seal any roof holes with weather resistant silicone.
Filters
