2019 Lance 1475 Lift Kit for 2-5/8 inches

Question

Question:

Do you have a Lift Kit for this Model and Year Single Axle Trailer? I believe the trailer has a Dexter # 10 axle. Hope to hear from you and thank you for your time and consideration.

asked by: Michael B

0

Expert Reply:

Your 2017 Lance 1475 has the Dexter #10 torsion axle. The lift kit for that axle is # K71-707-01 like you referenced and will give you a lift of 2-5/8 inches.

expert reply by: Jameson C

0

Answer 1

For your single axle Lance 1475 travel trailer you will use either Torsion Lift Kit #K71-723-01 or kit #K71-707-01 depending on which Torflex axle you have. You can check the identification sticker on the axle beam to find the axle number. If you…

view full answer...

Answer 2

On the new 2019 Ram 1500 the factory brake controller port is located under and behind the heater controls on the dash. I have attached an image that points to this location. You should be able to access the plug by simply reaching behind and…

view full answer...

Answer 3

If your Jeep Cherokee came from the factory with a 7-way trailer socket at the rear bumper then there will be a brake controller connection port under the dash. In this case you can plug in a controller like the Prodigy P3 #90195 or P2 #90885 simply…

view full answer...

Answer 4

Whether or not you need a weight distribution hitch for you Lance 1475 depends on several things. 1. Is the trailer weight more than 50 percent of your vehicle's weight? 2. Is the rear of your tow vehicle sagging when the trailer is hooked up? 3.…

view full answer...

Answer 5

A #9 Torflex axle is rated for 1,000 - 2,200 lbs so since your Lance 1575 weighs well over 2,200 lbs dry I'm confident you have a #10 Torflex axle (which can be rated for 2,300 - 4,000 lbs). With that in mind, since you have a single axle trailer…

view full answer...

Answer 6

I have a lift kit option for you, but there is not a shock kit currently made for torsion axles. For the #10 toflex axle in your 2017 Casita 17 we have the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01 if you have tandem axles or…

view full answer...

Answer 7

Your 2016 Jeep Cherokee that has the tow package will only need the install harness part #3014-P for the install of the P2 brake controller part #90885. It sounds like you may not have found the correct harness on your vehicle yet. Sometimes they can…

view full answer...

2019 Lance 1475 Lift Kit for 2-5/8 inches

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching