Cable Locks - Car Cable Lock

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

Hey, Skip! Happy to help get your new Jeep set up for flat towing. There is going to be a list of parts, so I'll go ahead and list them all below for ya. Blue Ox Base Plate: Part #BX1139 Blue Ox Avail Non-Binding Tow Bar: Part #BX7420 Demco…

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

Hey Daryl, I took a look at that PoleStar jack you mentioned and it looks like it has 2" diameter tubing. A good replacement jack foot for that jack will be the #LC165253. Designed to fit 3,500lb jacks with 2" tubing this will be a solid…

Hey Dennis, congrats on the new Jeep. You have to have a baseplate like item #BX1139 or a bumper rated to be flat towed with and then use an adapter like item #BX88357 to flat tow your 2025 Jeep Wrangler. Not all bumpers are rated to be flat towed.…

The only replacement part we have available for the original Blue Ox Patriot (BRK2012) is the Replacement Brake Claw #BRK2512. Unfortunately, this system was discontinued in 2017 and there are no other replacement parts available any longer. You may…

Hey Ethel, thanks for reaching out. No, I wouldn't recommend the Valterra StayPut Curved Leveler and Chock #VAL48MB if your tandem tires are only 4" apart. The wedges on the StayPut system need enough room to fit between the tires and create…

To flat tow your 2018 Jeep Wrangler JL you will need to start with compatible base plates; because you have a Blue Ox tow bar and assuming you have the standard factory bumper the best option is the Blue Ox Base Plate Kit #BX1139 which will be…

Hi Heidi, I did some searching and the smallest kit I could find is the Valterra StayPut Curved Leveler and Chock for Tandem Axles part #VAL48MB. The wheel chocks are 7" long x 5 3/4" wide x 5" tall and can give your trailer up to a 4…

For your Kuat Beta bike rack #B202-2 the easiest solution to lock the bikes to the rack and to the hitch is to use a cable lock such as #e98891. Run the cable through the bikes and the safety chain loops on the trailer hitch to deter theft. I have…

Hey Mike, If you have a Lippert 3,500lb jack #LC285318 the you could use the #LC165253 as a replacement. If you have a different model then let me know or we can take some measurements on your current footplate to find a suitable replacement.