Trailer stabilizer jacks like #TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more. What you're looking for is a jack…
For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…
To remove the 3" cap on your Valterra Sewer Drain like #T30A I recommend using the FloTool GRIPTECH 3-Position Adjustable Pliers #FT10627GT which can be adjusted between 2-3/4" and 4" to give you extra leverage in removing…
Great question, Rondi! The Yakima OnRamp #Y96FR is the first generation while the Yakima OnRamp LX #Y28DJ is the second generation of this rack. The LX has slightly higher weight ratings (70 lbs per bike on road and 42 off-road), the trays are…
It looks like your 2004 Fleetwood Pop-Up Camper has 20.5x8-10 tires which is the same as the size 205/65-10. To replace them I recommend the Loadstar item #AM1HP56. This tire has a weight capacity of 1,650 lbs at 90 psi and a speed rating of 87 mph.
I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
Good morning Timothy, and sorry for any confusion. The Draw-Tite Class 1 Trailer Hitch #24972 will fit both the hybrid and non-hybrid models of the 2022 Honda Accord. The way they have it laid out in our fit guide is a bit odd, I do agree.…
(1)
(8)
(1)
(1)
Filter Results
