Automotive Tools - Pollak

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

Hey Mike! The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR can be stored in that manner (with the oil plug facing up), but my contact at Power Mountain stressed that it should only be done for a short period of time, so I recommend setting it…

Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

Hi Charles, The Power Mountain Tall Boy Jack part #PM34FR is designed to be used with the axle or with the frame. Since you have torsion axles, you'll want to jack your trailer up by the frame as jacking it up by the axle could bend the…

Hey Todd! At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get…

Hey Andersen, without any type of attachment installed on the Power Mountain TallBoy Off Road Bottle Jack part #PM34FR the height is 9 inches when fully retracted and then 15 when extended. The lift range is right around 6-1/2 inches. Would that work…

Hi Mike! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 is compatible with A-frame jacks that have a 2" inner tube and a removable/interchangeable foot. As long as that matches your Lippert jack you will be able to use this scale with…

Good morning Bobbie! Sorry for the troubles you were having; I've been there before and know exactly how you feel. I have a great option for you, but the jack you were looking at - Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

Hello Kevin, thanks for reaching out. The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR is not made here in the USA it is made overseas. The jack lifts from 8-1/2" to 37-3/4 to you will want to compare this to the frame of your truck to…

Hi Greg, The BWMC2302B is only the replacement bar for the B&W Biker Bar motorcycle tie down. If you're needing the whole system, you'll want the B&W Biker Bar Motorcycle Tie Down System for Harley Davidson Softail part #BWMC2302. The…