Accessories and PArts - RV Water Heater, RV Designer

Thanks for letting us help Keith. For the Equal-i-zer Weight Distribution Shank for 2-1/2" Hitches #FA88FR, the distance from the top of the receiver shank to the top of the vertical mounting shank is 7" when installed in the rise position.…

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Dathan, congratulations on the new truck! The ReCurve R3 uses a standard shank so we do have some options that will work for you. The Equal-i-zer Weight Dist Shank #FA28FR has a 10" rise/6" drop and is 16" long overall. The…

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Greg, welcome back! So this is a great question but for a Dexter 3,500-lb axle, the castle/spindle nut does not stay torqued to a specific ft-lb value. Dexter's official bearing-adjustment procedure is while rotating the hub, tighten the…

Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…

Hey Thomas, the Blue Ox Avail tow bar part #BX7420 would be a really great option. It's very easy to use and has longer arms which allows the towed vehicle to track a little better behind the tow vehicle. Now if you wanted a braking system that…

Hey Cale, we have a way to get both of the Solera 2000 RV awnings in white with the part #LC434724 but we do not have the individual arms separately at this time. This is basically the conversion kit that comes with both arms for if you had a manual…

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…