Monitors Specs:
Features:
Plug this monitor into your vehicle's OBD-II port to get parameters (PIDs), diagnostic trouble codes (DTCs), MPG stats, and engine performance tests. Slim case has a hi-res color screen and 6-button control with user-friendly d-pad.
More Information >Videos
for Performance Chip
Help Articles
for Performance Chip
Expert Answers
for Performance Chip
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...For your Edge Evo HT 36030, I recommend using the same setting as you would for any of the tuners when hauling a load. I recommend using the "Tow" setting for light load tow.
view full answer...For your 2007 Chevy Silverado 2500 with 6.6L Diesel, the best way to increase your towing and non-towing fuel mileage is to use the Superchips Flashpaq F5 Performance Tuner - GM - Gas/Diesel #SU2845. Under the performance settings this can give you…
view full answer...I have a solution for you, but the Edge Module part #EZD1000A is not a fit for the 2005 Dodge Ram Cummins. Instead you would want the #EP36040 if you have the 325 horsepower Cummins or the part #EP30204 for if you have the Common Rail 24 valve that…
view full answer...Your Edge EvoHT2 #EP36040 is also a confirmed fit for your 2001 Dodge Cummins. This controller is only able to be used on one vehicle at a time, so setting that tuned vehicle back to stock will allow it to be used on another vehicle. Since he said he…
view full answer...I checked out the installation instructions for the EvoHT2 Tuner, part #EP36040 and found that on page 18 it is explained how to return the engine tuning to stock. From the main menu you will need to select 'Tune Vehicle'. Then select…
view full answer...Hey Michael. The Performance Tool LED Safety Flare Set item #PT54PJ are powered by three AAA batteries each. What kind of vehicle do you have?
view full answer...We have the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks #TJD-12000-GR which does include 2 roll pins. This is for the TJD-12000 Series jacks. If that is the jack you have then these will work. If you have a different…
view full answer...Yes, the Edge CTS3 Programmer part #EP69YR is easy to install and is a confirmed fit for your 2004 GMC Sierra with a 6.6 liter diesel engine. It will give you up to 135 horsepower and 240 ft lbs of torque so you'll notice quite a bit of…
view full answer...You can unplug the Edge CTS3 tuner like part #EP69YR after the tune is installed on the truck and the tune will not be affected. The tuner would need to be plugged in to use the display or the change the tune levels.
view full answer...Filters
- 1 results
Contact and Help
What our customers are saying:
Thanks for the great service. The order arrived at my doorstep yesterday afternoon. Thank you for making sure the order was complete. I installed the hitch and wire kit last night with no problems. The instructions were perfect. Bruce
Bruce
Maplewood, MN