2026 Chevrolet Silverado 3500 Vehicle Cargo Control

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 8' bed only

Does not fit models with Dual Rear Wheels.

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 8' bed only

Does not fit models with Dual Rear Wheels.

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 8' bed only

Does not fit models with Dual Rear Wheels.

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 6-3/4' bed

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Features:

Keep your truck clean and organized with this under seat storage box. Custom made to fit your vehicle. Large capacity is perfect for storing jumper cables, tools, and all sorts of supplies.

Installation Notes:

Does not fit vehicles with carpeted under seat storage

Features:

Keep your truck clean and organized with this under seat storage box. Custom made to fit your vehicle. Large capacity is perfect for storing jumper cables, tools, and all sorts of supplies.

Installation Notes:

Does not fit vehicles with carpeted under seat storage

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 6-3/4' bed

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Features:

These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Features:

These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.

Installation Notes:

This kit is intended for vehicles with a 6-3/4' bed

Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).

Features:

These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).

Features:

These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).

Features:

These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.

Installation Notes:

This kit is intended for vehicles with a 8' bed

Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).

Features:

Got stuff rolling around on the floor of your truck? Corral it with a custom cargo organizer. The tough polyethylene plastic bin stores valuables under your vehicle's rear cab seats. Converts easily to a gun case. Lid locks on each side.

Features:

Got stuff rolling around on the floor of your truck? Corral it with a custom cargo organizer. The tough polyethylene plastic bin stores valuables under your vehicle's rear cab seats, hiding them from thieves. Converts easily to a gun case.

Features:

Got stuff rolling around on the floor of your truck? Corral it with a custom cargo organizer. The tough polyethylene plastic bin stores valuables under your vehicle's rear cab seats, hiding them from thieves. Converts easily to a gun case.

Features:

Got stuff rolling around on the floor of your truck? Corral it with a custom cargo organizer. The tough polyethylene plastic bin stores valuables under your vehicle's rear cab seats, hiding them from thieves. Converts easily to a gun case.

Features:

This custom-fit MOLLE panel will make your overlanding adventures even better. Allows you to mount MOLLE bags, trail gear, tools, high-lift jacks, axes, shovels, RotopaX, Maxtrax, and more. Easy installation on the passenger side of your truck bed.

Installation Notes:

No drilling required for installation

Features:

Pop-up tie-down loops mount quickly and easily in the rear stake pockets of your truck. Just push the loops down when not in use for a sleek, unobtrusive look. Sturdy, chrome-plated stainless steel is durable and rustproof.

Tech Tip:

Product will fit rear stake pockets only

Features:

Pop-up tie-down loops mount quickly and easily in the rear stake pockets of your truck. Just push the loops down when not in use for a sleek, unobtrusive look. Sturdy, chrome-plated stainless steel is durable and rustproof.

Tech Tip:

Product will fit rear stake pockets only

Features:

Pop-up tie-down loops mount quickly and easily in the rear stake pockets of your truck. Just push the loops down when not in use for a sleek, unobtrusive look. Sturdy, chrome-plated stainless steel is durable and rustproof.

Tech Tip:

Product will fit rear stake pockets only

Features:

This custom-fit MOLLE panel will make your overlanding adventures even better. Allows you to mount MOLLE bags, trail gear, tools, high-lift jacks, axes, shovels, RotopaX, Maxtrax, and more. Easy installation on the cab side of your truck bed.

Installation Notes:

No drilling required for installation

Features:

This custom-fit MOLLE panel will make your overlanding adventures even better. Allows you to mount MOLLE bags, trail gear, tools, high-lift jacks, axes, shovels, RotopaX, Maxtrax, and more. Easy installation on the cab side of your truck bed.

Installation Notes:

No drilling required for installation

Features:

This custom-fit MOLLE panel will make your overlanding adventures even better. Allows you to mount MOLLE bags, trail gear, tools, high-lift jacks, axes, shovels, RotopaX, Maxtrax, and more. Easy installation on the cab side of your truck bed.

Installation Notes:

No drilling required for installation

Features:

Got stuff rolling around on the floor of your truck? Corral it with a custom cargo organizer. The tough polyethylene plastic bin stores valuables under your vehicle's rear cab seats, hiding them from thieves. Converts easily to a gun case.

Features:

This custom-fit MOLLE panel will make your overlanding adventures even better. Allows you to mount MOLLE bags, trail gear, tools, high-lift jacks, axes, shovels, RotopaX, Maxtrax, and more. Easy installation on the driver side of your truck bed.

Installation Notes:

No drilling required for installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 6-3/4' bed only

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 8' bed only

Does not fit models with Dual Rear Wheels.

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 8' bed only

Does not fit models with Dual Rear Wheels.

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 8' bed only

Does not fit models with Dual Rear Wheels.

No drilling required for installation

Tech Tip:

Tail light must be removed during installation

Features:

These custom-fit utility rails let you add tie-down anchors to the siderails on your truck bed. Full-length channels allow you to slide the anchors precisely where they're needed. Compatible with your inside-the-rail tonneau cover or tool box.

Installation Notes:

Designed for models with 6-3/4' bed only

No drilling required for installation

Tech Tip:

Tail light must be removed during installation