2027 Buick Envision BOLT brand vehicle and hitch locks

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Good morning John! So we actually don't have replacement leaf springs for vehicles, so if your 2015 F150xl needs new suspension, you'll want to do that before going the route of upgrading with suspension enhancement items that we are able to…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

Hello Craig, The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs #CC-275 that you were looking at would definitely work for what you are trying to accomplish. Another option would be the Gen-Y…

Hey Chris, I went ahead and reached out to Access directly since the photos we have are not as current yet. The Rockstar Mudflap Adjustable Height #A62ZX will come with a cutout for your specific vehicles exhaust. When I spoke with them and gave them…

It might be Dan but I wasn't able to pull any specific information off of the UFP 13674 part number you gave me. What you'll need to do is pull one of the hubs and read the part numbers stamped into the sides of the bearings. This information…

Hey Dan, whenever possible I recommend going with a 2 inch hitch like the Curt #C13406 that fits your 2018 Toyota Rav4 as it has the better towing capacities and also more accessories are made for it. If you are planning on towing this is for sure…

Hello Crystal, thanks for reaching out. The Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers #Y74ZR will stick out 35-1/2". This is measured from the center of the hitch pin hole to the rearmost part of the rack. Can't say…

Hey Tim, thanks for reaching out! The Trimax Puck Lock for Trailer Door Hasps #TMX96RR has an overall diameter of 2-7/8", and the opening is 1-3/4" wide x 3/4" tall. It's also 3/4" deep. I've attached some photos for you…

Hello Chris, Both are great options, and for me, the decision would really come down to the installation process. The Draw-Tite #DT53GR is much easier to install, though it does require trimming the fascia. I’ve attached a picture for reference—the…

I can confirm for you that the Curt Trailer Hitch Receiver #C11202 for your 2010 Nissan Cube does require a stabilizing strap for use with a bike rack item #18050. So you can use this rack and hitch combo on your Nissan. The Thule Doubletrack Pro XT…

I went out to the warehouse and took some measurements of the Replacement Lock Cylinder #BL692916 for you. The max diameter of the cylinder is about 0.98" and then the max length (up to the bezel) is about 1.70" as you can see in the…