BOLT Locks Specs:
Features:
This 5/8" diameter receiver lock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.
More Information >BOLT Locks Specs:
Features:
This heavy-duty cable lock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your equipment safe and secure.
More Information >BOLT Locks Specs:
Features:
This coupler pin lock ensures that your trailer is securely hitched and helps keep it safe from theft while being stored. With this lock, you won't have to carry an additional key - it codes to your vehicle's ignition key.
More Information >BOLT Locks Specs:
Features:
This universal coupler lock protects your trailer from towaway theft. Lock codes to your vehicle's ignition key, and it's nearly impossible to pick or bump. Included lock, base plate with ball, and shackle fit most coupler and latch styles.
More Information >BOLT Locks Specs:
Features:
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.
More Information >BOLT Locks Specs:
Features:
This 1/2" diameter receiver lock codes to your vehicle's ignition key. Made of automotive grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.
More Information >BOLT Locks Specs:
Features:
This heavy-duty padlock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your trailer and equipment safe and secure.
More Information >BOLT Locks Specs:
Features:
This recovery hook helps prepare your Jeep, truck, or SUV for an off-road adventure. It installs on the tab of your aftermarket bumper and provides an attachment point for a rope, strap, or chain. It also locks with your vehicle's ignition key.
More Information >Videos
for BOLT Locks
Help Articles
for BOLT Locks
Expert Answers
for BOLT Locks
From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.
view full answer...Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the…
view full answer...I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 which adds a power lock to the ARE camper shell on your 2016 Ford F-250. The only other thing that you might…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Thanks for the picture! Yes, the BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - Ford Side-Cut Key item #BL7023585 will work with your key fob. This system is confirmed to fit your 2019 Ford F-250 Super Duty's key.…
view full answer...The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.
view full answer...From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball Mount #BWTS10040B measures 10". Then with the 2" hitch ball in the lowest position the 2-5/16" hitch ball will sit about 12"…
view full answer...That's a good question, and there's an interesting reason why there are the long holes on the side of the etrailer Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch #e28JR. Using a regular reducer sleeve requires you to…
view full answer...BOLT locks key to the ignition key so that you can have everything unlocked with one key so that you're not carrying as much or as likely to lose the key. I recommend checking the key for the ignition key for the F-150 first to see if he keyed it…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Thank you for providing that information. It sounds like you already know this, but you want to choose a replacement equalizer that closely matches the one that came with the trailer. Since you have an 8" measurement on your standard equalizers…
view full answer...Filter Products (16)
Contact and Help
What our customers are saying:
In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!
Randy
Watkinsville, GA