2020 East to West Silver Lake Travel Trailer Blind Spot Detection

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have…

There a few different ways to determine this. You can have a helper activate the turn signals, running lights and brakes. If a single bulb lights for each function (on each side of the car) then you have incandescent lamps. If you have LED's…

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If…

Hi Sean, We do offer the Ground Control 3.0 for prepped trailers part number 2021106810 as part #LC52ED. This is going to include the rest of the components needed to complete the system. Since we don't have a video of this kit yet…

Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and 8' bed lengths of the new 2024 Ram 2500. It has a massive 35,000 lbs capacity and installs in…

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

It looks like your 2019 Lance 2465 travel trailer tops out at 6,830 lbs. The Strait-Line Weight Distribution w/ Sway Control item #RP66074 will work for you trailer. It has a tongue weight range of 600 lbs - 1,200 lbs which is perfect for your Lance…

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

Yes, the Patriot B and W Hitch part #BWRVK3270 is designed to fit the industry standard fifth wheel rails like what the Curt kit part #C16420-204 that you referenced provides. These two would fit and work very well together.