2009 Forest River Rockwood Ultra Lite Travel Trailer Blind Spot Detection

There a few different ways to determine this. You can have a helper activate the turn signals, running lights and brakes. If a single bulb lights for each function (on each side of the car) then you have incandescent lamps. If you have…

Yes, absolutely the Blind Spot Monitoring System for Motorcycles, #CU44TR will work on your 2016 Polaris Slingshot. You just have to make sure you are still using the factory location for the license plate mount. Understanding that modification of…

Looking at the manual for the WF-1500 it looks like it uses RJ11 connectors for the remote while the Progressive Dynamics 1000 Watt Pure Sine Wave Inverter #PD34FR use an RJ22 connector. This will definitely be an equivalent swap but…

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs…

While unfortunately I don't have any way of knowing specifically what wheel caps are on your Arctic Fox 5th wheel, it's pretty easy to determine what you need. Just measure the center bore from inside to inside of your…

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

Hey Ronald, I went ahead and cross-referenced with Lippert and it looks like you have a 1621HD pin box so the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY46FR will work as a replacement.

There is not a flow rate listed for the SureCan Gas Can #SC78GR, so I cannot say how fast it is going to drain. If the main concern is fatigue from lifting and holding the can up, it has a similar flow as most gas cans you are probably used to…

From the measurements supplied, it looks like the Dexter E-Z Flex #K71-652-00 will be the best option. The equalizer will basically match your current ones and this will have both wet bolts and the ability to grease the equalizer bolt, but it is a…

If your current equalizer is 2" tall x 5-3/4" long, and your shackle straps are 2-1/4" long when measured from the center of one eye hole to the other, then the #K71-359-00 is going to be the kit you need. This…

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00 will work on axles up to 8,000lbs.