# 1
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Super convenient and well worth the money. All 3 of my trailers have a different ball size, and this is a breeze compared to constantly swapping tow hitches. Keep the pins well lubricated, and they slide well maintain their appearance.
# 2
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
I bought my first ball mount way back when I was broke (bought the cheapest one in the big box store). With my new trailer I needed 14k capacity instead of 10k so I double checked the mount before buying a heavier duty ball...it was rated for only 5k!! Folks, check those mounts to make sure they're rated for the job!! This one is a honker btw, love it. Side by side with old it's like brick vs bubble gum, embarrassing I haven't upgraded sooner. And thanks for the guidance.
# 3
EZ Heavy Duty Adjustable Hitch with Combo Ball - 8" Drop/Rise - 14,000 lbs
Just did ~500miles with about 5k worth of car plus trailer over hill and dale. Works great. No detectable wobbling, but pins are easy to get through holes (not too tight or misaligned). Heavy, but not like, completely unwieldy.
This Hitch does the job perfectly for all my trailers keeping in the upright position and did not notice any excessive rattle..
# 4
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
Product is awesome. Shipping container was destroyed when it arrived. Product was not hurt.
Was hoping this would help with shock reduction. It doesn't. Has to fit loosely into hitch to function so it slams side to side and front to back. Would not recommend. Very disappointed in this purchase. Trailers service is exceptional. Easy to order. Arrived quickly, well packed.
# 5
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3/4" Rise, 2" Drop - 18,000 lbs
I was very pleased with etralier for filling my order promptly. I was not pleased with usps.When the hitch arrived the box had been damaged. It was empty. I contacted etrailer about the problem. They were very helpful and offered me a refund or replacement. I chose the replacement. It was shipped promptly in good shape.It was a pleasure doing business with etrailer. Jon
Excellent product. I have been using the Convert-A-Ball shock absorbing mounted hitch for 30 yrs on 3 1500 Chevy's and now a F250. The 2 1/2" hitch is massive and I expect the same great performance from it as all my others.
# 6
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.
I like that it stows under the truck and i'm not banging my leg and getting grease on myself. The only draw back was i wanted to use my anti slap bracket and it would not fit due to the insert butts up to the hitch receiver. I'm not experiencing any slapping when taking off or stopping at this time.I use this for my boat and a utility trailer and i don't have to change hitch insert which is really nice, one less thing to do.
# 7
B&W Tow & Stow 3-Ball Mount - 2.5" Hitch - 7" Drop/7.5" Rise - 18K - Black
I purchased this hitch for my 2024 GMC Sierra 3500 which has the multiple tailgate. The hitch was in the stow position but still damaged my tailgate when I had the tailgate fully down and used the step feature. it bent the metal and scratched the paint. So please be aware this hitch is not recommended for the 2024 GMC sierra 3500 with multiple tailgate.
About a year ago, I bought a new to me truck that needed a 2.5" hitch. I love this 3 in 1 setup. I really like that it stows and I can always have it back there. I haven't used the 1 7/8" yet, but there are plenty of old trailers out there that would need it at some point. I have used the 2" & 2 5/16" plenty. It's sturdy, looks good, and is super convenient, what's not to like about it.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 9
Curt Forged Ball Mount for 2-1/2" Hitches - 1/2" Rise - 2" Drop - 20,000 lbs
Very good heavy duty rating which is what I wanted. etrailer was great to work with
I have been towing trailers many years With no issues until recently. Trailer weights have increased and loads also. My three way ball with 2 5/16 was torn off of tubing because of insufficient welding, I was very lucky. Yes I went to a solid receiver with bolt style ball. Very great setup. Thanks curt for designing heavy hitches and etrailer for easy ordering.
# 10
Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K
The product was well described on the web site. The truck matching worked great and was easy to use. This hitch was very easy to order and the price was good. The delivery date was correct, it was easy to follow with the information provided. The hitch was as advertised, easy to install and easy to use. Great Job!
First of all, ETRAILER is a great company in my opinion. Their selection, prices and customer service are all great. This hitch is stout! I'm the type that I'd rather have more capability than what I may actually use. For what I will use this for, I'm 100% sure it will be way more than I'll ever need but I'm also confident that I would not have any issues using it regularly at it's maximum capability. The construction of it is top notch and I'd be willing to bet it can do more than what it's rated for. I will definitely be ordering the 20K Pintle that works with this as well as a Curt 5th Wheel and Gooseneck. Thank you ETRAILER and thank you CURT for amazing service and and amazing product.
# 11
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 12
B&W Tow & Stow 2-Ball Mount - 2.5" Hitch - 5" Drop/4.5" Rise - 18K - Black
Was shipped on time.B&W hitch was fine just missing one pin clip.Box had several holes where pin clip could have fallen out. Looks like it had a rough trip.
It is exactly what I expected, fast delivery, extremely fine product. I also have a turnover ball from you that is also a B&W product. Thank You, Bob
# 13
etrailer Ball Mount Kit for 2-1/2" Hitches - 1-1/2" Rise or 3" Drop - 18,000 lbs
I am a frequent etrailer customer, the variety and availability of quality components and excellent service is what keeps me coming back. When trailering I strive to be as safe as possible, which is why I chose this heavy duty ball mount to tow my 10,000# car hauler trailer. With this very robust piece, I can be assured that the connection between my truck and trailer is secure.
This was our company's first ETRAILER order. My original order was for a Blu Ox receiver reducer. The plan was to continue using our current 2" drawbars with the 2 1/2" receiver on the "new" (2008) truck. Upon installation it was very apparent that there was way to much side play for safe towing of heavy loads on gravel roads. ETRAILER customer service was contacted for assistance. Holly was extremely knowledgeable regarding the product line and also had "hands on" experience with trailer towing. She not only guided me to the best resolution to my issue; but, also expedited shipment of the replacement drawbar. She further emailed a return shipping label for the reducer that was easy to print, along with straight forward and easy to understand instructions for the return. The UPS driver even commented about the label being the correct size as opposed to many undersized labels that he has received. Our company will now use ETRAILER as our "go to" vendor for trailer repair and towing supplies. As for the drawbar, the construction is one piece forged steel with an I-beam design. The ball appears to be high quality. I have complete confidence that the drawbar and ball kit will perform as needed when we are towing equipment or logs on gravel and dirt roads; as well as, off-road.
# 14
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.
# 15
Curt Forged Ball Mount for 2-1/2" Hitches - 2-1/2" Rise - 4" Drop - 20,000 lbs
Hitch ball and mounts all ready to the test!!! Great Products!! Five Star e-trailer team, very informative, fast and accurate shipping, perfect packaging and "GREAT" customer service"
This review does not just serve my recent order, but all of the orders before it. I have purchased a number of items from etrailer and everything was sent in a timely manor as stated and promised. All of the items I received were exactly as described. I watched a number of videos, read a number of diagrams and all of the help information was exactly what I needed. In other words I did not need to go anywhere else to get a full tow package for a Dodge 5500 that did not have one. I cannot say enough about how this website helped me. Also the pricing was about the best I could find and I did a lot of searching to make sure. This is a top notch site and I will absolutely come back here for my future towing needs.
# 16
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount. The service has been outstanding. This is the place to go.
# 17
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
This is a great hitch. Highly recommend this hitch. This is my second curt hitch, first one was on my ford f450 but unfortunately that one wouldn’t fit on my new truck, do to shank size.
# 18
Self-Locking, Adjustable 2-Ball Mount w Chrome Balls - 2.5" Hitch - 8" Drop, 9" Rise
Great hitch at a great price. Shipping was fast. Ordered online and it was a breeze. The picture of the hitch showed it had a sleeve but when it came there was no sleeve. Which was nice fits great in my 21/2 receiver.
I use this everyday, and I love it. It still looks like new, the key locks and slides still work like they did when they were new. I would 100% buy another one.
# 19
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 6" Rise - 18K
Love my new hitch and the adjustability. Much lighter than my previous hitch
The product is one of the best made items I’ve seen in a very long time. Etrailer was very responsive with the order and I received the product very quickly.
# 20
Curt Pintle Hook with 2-5/16" Ball for 2-1/2" Hitches - 20,000 lbs
After finding out that it's made in China I ordered a similarly priced Gen Y dual ball mount with better weight rating and made in USA. Not a bad hitch if you need pintle ring capability its just the made in china thing that down rates it for me. My fault for not looking more carefully about country of origin.
This is a heavy duty combo pintle / ball mount. It is replacing one that failed at the welds. Since this is a solid piece with no welds I expect many years of use.
Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Well begin by going ahead and getting our hitch height measurement. To get this measurement, you measure from the ground to the inside top edge of the receiver tube. We have a measurement of 19 1/4 inches. Now well go ahead and take our ball mount, slide the shank of our ball mount into our receive tube, line up the pin hole, and install our pin and clip. Well go ahead and mount it in the rise position first.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado well be test fitting the cushioned ball mount for 2-inch hitches a 1-inch rise or a 2-inch drop rated at 14,000 pounds, part number amsc2hd. To begin we need to go ahead and get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. Our hitch height for this vehicle is 19 1/4 inches. Now well go ahead and slide the ball mount shank into the receiver tube of our hitch, line up the hitch pin hole, and secure it with the pin and clip. First we begin in our drop position.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado well be test fitting the Convert-a-Ball cushioned ball mount for two-inch hitches with a 6 inch rise or 8 inch drop rated at 10,000 pounds, part number amsc8. Now to begin well go ahead and get our hitch height measurement. To do this well measure from the ground to the inside top edge of the receiver tube opening. Our hitch height for this vehicle is 19 1/4 inches. Keep in mind that your measurement can vary due to hitch styles, tire sizes, or any other accessory that may affect your vehicles ride height. Now we can go ahead and slide the shank of our ball mount into our hitch, line up the pin hole, and install our hitch pin and clip.
Convert-A-Ball Pintle Mounting Bar Review - 2013 Chevrolet Silervado
Today on our 2013 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball Cushioned Adjustable Pintle Mounting Bar for 2-inch hitches rated at 10,000 pounds. This is part number AMPC2. This eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushioned shank protects your equipment and smoothes your ride. Now before we install our pintle mount, we need to go ahead and get our hitch height measurement. To do this, we'll measure from the ground to the inside top edge of our receiver tube.
Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Youll be able to tow up to 10,000 pounds with supreme safety and convenience of an adjustable five and a half inch drop, and six and a half inch rise. This kit includes a chrome plated steel ball combo for both two inch and two and five sixteenths inch balls. It will fit two inch by two inch receiver hitches. The aluminum alloy is strong yet lightweight and looks great, and will not rust. The ball mount adjusts in one inch increments up to five and a half inches drop and six and a half inches rise.
Draw-Tite Ball Mount Review - 2013 Chervolet Silverado
Today on our 2013 Chevrolet Silverado well be test fitting the Draw Tite Ball Mount, part number 2923. This will give you a three-quarter inch rise or a two inch drop and is rated at 6,000 pounds. To begin our test fit, well first do a measurement to give us out hitch height. To do this well measure from the ground to the top of the receiver tube opening. In this case, thats 18 inches. This measurement can vary due to tire size, style of hitch or any other accessory that may adjust the height of the vehicle.
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado well be test fitting part number AMSC4. This is the Convert-A-Ball Cushion Ball Mount for two-inch hitches with a two and three-quarter inch rise for a four-inch drop, rated at 10,000 pounds. Before we begin our test fit, well first need to get our hitch height measurement. To do this, well measure from the top of the receiver tube to the ground. On this truck, that measurement is 18 inches. Now, keep in mind that measurement can vary due to hitch style, tire size or any other accessory that may change the vehicle ride height.
Roll-A-Hitch Cushioned Telescoping Swiveling Ball Mount Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Roll-A-Hitch Cushioned Telescoping Swiveling ball mount in a 7-inch drop rated at 10,000lbs. This is part number CAB-LD6. Now if you have a lot of frustration over hard to reach hookups, this ball mount is the answer. Now it does have a 6-inch drop and has to be used in the drop position. Now before we begin our test fit, well need to know what our hitch height measurement is. To do this, well measure from the top of the receiver tube opening to the ground.
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned adjustable ball mount up to a 7-inch rise or down to a 9-inch drop rated at 5,000lbs. This is part number CAB-UM. Before we begin our test fit, well need to get a hitch height measurement. To do this, well measure from the top of the receiver tube opening to the ground. On this truck it measures 18 inches. Now keep in mind, that measurement can vary due to tire size, hitch style or any other accessory that may change vehicle right height.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned ball mount for 2-inch hitches with a inch rise or 2-inch drop rated at 10,000lbs. This is part number AMSC2. To begin our test fit, well need to get a hitch height measurement. To do this, well measure from the top of the receiver tube to the ground. Now on this truck that measures 18 inches. Keep in mind, this measurement can vary due to tire size, hitch style or any other accessories that may change vehicle right height.
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Chevrolet Silverado
Today on our 2013 Chevrolet Silverado, well be test fitting Covert-A-Ball Cushioned weight distribution shank for 2-inch hitches part number AMAC1. This weight distribution shank helps to eliminate the push and pull feeling and clank often experienced when towing heavy trailers. The multiple attachment holes allow you to level your weight distribution head. This shank rated at 10,000lbs. This shank is also compatible with Convert-A-Ball accessories including the Pintle Hook combo with balls part number PH4, the ball mount adapter part number BA1 and the Clevis pin adapter part number CA1. The accessories attached with a 5/8-inch hitch pin.
Gen-Y Adjustable 2-Ball Mount with Stacked Receivers Installation - 2008 Chevrolet Silverado
Hi, everyone. It's Evangeline here at etrailer. And today we have the Gen-Y Adjustable Ball Mount with a 32,000-pound weight capacity. We're gonna take a look at how it fits our 2008 Chevrolet Silverado 3500. This is actually a very versatile ball mount with a lot of weight capacity, but both a very heavy ball mount. So some people call this the one stop shop hitch ball mount and that's because it has stacked receivers.
Andersen EZ Heavy Duty Adjustable Hitch Installation - 2008 Chevrolet Silverado
Today on our 2008 Chevrolet Silverado 2500 with 4 inch lift kit we're going to do a review and install of the Andersen Hitches EZ Heavy Duty Adjustable Hitch with Combo Ball part number AM3298. Here we have our nice heavy duty solid portion of the shank with the black powder coating. This is a 2 inch by 2 inch shank. It will fit your standard class 3 and 4 inch hitches that have a 2 inch by 2 inch opening or in this case where you have a 2 1/2 by 2 1/2 inch opening and inside is a sleeve. It will also work with these applications. We'll simply slide the shank into the sleeve then aligning the shank and sleeve up with the hitch pre drilled hole so that we can reinstall our pin and clip. Here we have our combination ball.
Draw-Tite Ball Mount Review - 2008 Chevrolet Silverado
Today on our 2008 Chevrolet Silverado, we'll be test fitting the Draw-Tite ball mount with a 3/4" rise or 2" drop, rated at 7500 lbs., part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and our measurement is 18". Note that the ride height of your vehicle may vary due to tire size, hitch style, or some after-market accessories. We'll now begin our test fit by sliding the ball mount into the opening of the hitch in the drop position. We'll line up the holes and secure it with a pin and clip.
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2006 Chevrolet Silverado
Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned six way multi-hitch ball, part number CAB-6W for two inch hitches, rated at 10,000 pounds. To begin our test fit, well need to get our hitch height measurement. To do this well measure from the top of the receiver tube to the ground, which in this case measures 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Were now ready to fit the ball mount to the vehicle. Well now slide the ball mount into the hitch, first using the two and five-sixteenths inch ball.
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2006 Chevrolet Silverado
Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with two and three-quarter inch rise or four inch drop, rated at 10,000 pounds. To begin our test fit well need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Chevrolet Silverado
Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with three-quarter inch rise or two inch drop, rated at 10,000 pounds. Before we test fit out ball mount well first need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Now that we have our hitch height measurement well go ahead and slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2006 Chevrolet Silverado
Today, on our 2006 Chevrolet Silverado, we'll be test-fitting the Convert-A-Ball cushion ball mount for 2-inch hitches for the 6 3/4-inch rise or 8-inch drop, rated at 10,000 pounds. Now, to begin, we'll need to get out hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so it's a good idea to measure yours. We'll now simply slide the shank of our ball mount into the hitch, line up the hitch pinhole and install our hitch pin.
Convert-A-Ball Pintle Mounting Bar Review - 2006 Chevrolet Silverado
Today, on our 2006 Chevrolet Silverado, we'll be test-fitting the Convert-A-Ball Cushion adjustable pintle mounting bar for two-inch hitches rated at 10,000 pounds. This is part number AMPC2. Now, this eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushion shank protects your equipment and smooths your ride. Now, before we test-fit our pintle mount, we need to get our hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground.
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2006 Chevrolet Silverado
Today, on our 2006 Chevrolet Silverado, we'll be test fitting the Convert-A-Ball dual cushion adjustable ball mount with 7-inch rise or 9-inch drop, rated at 5,000 pounds, part number CAB-UM. Now, to begin our test fit, we'll need to get our hitch height measurement first. To do this, we'll measure from the top of the receiver tube opening to the ground. On this truck, that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so its a good idea to measure yours. We'll now slide the shank of the ball mount into the hitch, line up the hitch pinhole, and install our pin and clip securing our ball mount to the vehicle in the drop position.
Draw-Tite Ball Mount Review - 2006 Chevrolet Silverado
Today on our 2006 Chevy Silverado 1500 we'll be test fitting the Draw-Tite ball mount with a 3/4 inch rise or 2 inch drop rated at 6000 lbs, part number 2923. A tried and true design makes this makes this ball mount one of our most popular sellers. You'll notice the ball mount has an angle cut which will allow for the ball mount to slide into your hitch with ease. Now, the ball mount provides 8-1/2 inches of clearance from the center of the hitch pinhole to the center of the 1 inch shank. This will fit a 2 inch by 2 inch receiver and uses a ball with a 1 inch shank. From the top of the receiver tube to the ground on this truck is 17-3/4 inches.
Andersen Rapid Hitch Ball Mount Review - 2006 Chevrolet Silverado
Today on our 2006 Chevrolet Silverado 1500 we'll be test-fitting the Rapid Hitch Adustable Aluminum Ball Mount Kit with two chrome balls, part number AM3410. Now you'll be able to tow up to 10,000 pounds with supreme safety and the convenience of an adjustable 5 1/2 inch drop and 6 1/2 inch rise. This kit includes a chrome-plated steel ball combo for both 2 inch and 2 5/16 inch. It will fit 2 inch hitches. The aluminum alloy is strong yet lightweight and looks great and will not rust. The ball mount adjust in 1 inch increments up to 5 1/2 inch drop and 6 1/2 inch rise.
What our customers are saying:
"The people answering the phones were professional & knowledgeable. All this and the best prices on the internet, How can you go wrong?"