Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2006 Chevrolet Silverado

Products Featured in this Video

Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs

1102 reviews

Code: AMSC4

Retail: $110.36

Price:  $80.17

• Trailer Hitch Ball Mount
• Fixed Ball Mount
• No Ball
• 1 Inch Ball Hole Diameter
• Steel Shank - Gloss Black

• Drop - 4 Inch
• Rise - 3 Inch
• Fits 2 Inch Hitch
• Class IV
• 10000 lbs GTW
• Shock Absorbing
• Convert-A-Ball

Sturdy steel ball mount with a solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Polyurethane interior acts as a shock absorber to reduce vibration. Powder coat finish protects against rust.

Do you have a question about part AMSC4?more information >     

Review of the Convert-A-Ball Ball Mount with 4 Inch Drop on a 2006 Chevrolet Silverado

Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with two and three-quarter inch rise or four inch drop, rated at 10,000 pounds. To begin our test fit well need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin.

Well then put the clip on the other side of the pin, securing our ball mount to the vehicle in the drop position. In the drop position from the top of the ball mount platform to the ground measures 15 inches. Well now go ahead and flip our ball mount over to the rise position. In the rise position from the top of the ball mount platform to the ground measures 22 inches. Thatll do it for the Convert-A-Ball cushioned ball mount for two inch hitches, part number AMSC4 on our 2006 Chevrolet Silverado..