Customers compare CAB-6W to these similar products
Products Featured in this Video
Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned six way multi-hitch ball, part number CAB-6W for two inch hitches, rated at 10,000 pounds. To begin our test fit, well need to get our hitch height measurement. To do this well measure from the top of the receiver tube to the ground, which in this case measures 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Were now ready to fit the ball mount to the vehicle. Well now slide the ball mount into the hitch, first using the two and five-sixteenths inch ball.
Well line up the hitch pin hole and install our hitch pin. Well then put the clip in to secure the ball mount to the vehicle. This ball mount will make it capable for you to use an inch and-seven-eighths diameter hitch ball, two inch hitch ball, two and five-sixteenths inch hitch ball, or a Clevis lunette ring or spade. All youll need to do is simply rotate the ball mount so that the correct hitch style is facing up. All of these will have a hitch height measurement of 19 inches, the same as the hitch height measurement that we just got.
That will complete the test fit of the Convert-A-Ball cushioned six way multi-hitch ball mount for two inch hitches rated at 10,000 pounds, part number CAB-6W on our 2006 Chevrolet Silverado.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.