Products Featured in this Video
Today, on our 2006 Chevrolet Silverado, we'll be test-fitting the Convert-A-Ball Cushion adjustable pintle mounting bar for two-inch hitches rated at 10,000 pounds. This is part number AMPC2. Now, this eight-hole mounting bar lets you adjust the pintle height to level your trailer. Its cushion shank protects your equipment and smooths your ride. Now, before we test-fit our pintle mount, we need to get our hitch height measurement. To do this, we'll measure from the top of the receiver tube opening to the ground.
On this truck, that measurement is 19 inches. Now, keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicle's right height, so its a good idea to measure yours. We'll now simply slide the shank of the pintle mount into the hitch, line up the hitch pinhole and install our hitch pin. We'll then put the clip on the other side securing the pintle mount to the vehicle. Now, in its lowest position, the two holes for mounting the pintle will measure 13 and 3/4 inches.
In its full-rise position, the two holes for mounting the pintle measures 22 and 1/2 inches. Now, the holes are drilled 1 3/4 inches apart from top to bottom and 3 3/8 inches apart from left to right. That will complete our test of the Convert-A-Ball cushion adjustable pintle mounting bar for 2-inch hitches, rated at 10,000 pounds, part number AMPC2, on our 2006 Chevrolet Silverado.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.